BAE00EP overview
BAE00EP is a component documented by Balluff Korea Ltd. The PDF description identifies it as "Switching Power Supplies 2.28_2021-07-15." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Balluff Korea Ltd.
- Part number: BAE00EP
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 91 % Hold-up time ≥ 100 ms at 230 V AC ≥ 25 ms at 115 V AC Input fuse T 6.3 A internal Input voltage 100…240 V AC, 1-phase Input voltage 90...254 V AC Input/output insulation voltage 3000 V AC Inrush current ≤ 30 A Isolation resistance ≥ 1.
- 4s Output voltage 24 VDC Output voltage, tolerance -1…3 % Power boost 150 % Power boost, duration max.
- 1 % Settling time 1 ms Switching frequency 140000 Hz Turn-on time max.
- Connector Drawings Power IN PIN 1: GND PIN 2: L PIN 3: N Power Out PIN 1: +24V PIN 2: +24V PIN 3: 0V / GND PIN 4: 0V / GND
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the BAE00EP datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=bae00ep-balluff-korea-ltd