APTB1615SURKCGKC-F01 overview
APTB1615SURKCGKC-F01 is a component documented by HK TO-GRACE TECHNOLOGY. The PDF description identifies it as "1.6 x 1.5 mm Bi-Color SMD Chip LED Lamp." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: HK TO-GRACE TECHNOLOGY ...
- Part number: APTB1615SURKCGKC-F01
- Category: IC
- Datasheet length: 4 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Spec No: DSAF9413 / 1203002123 Rev No: V.14A Date: 04/09/2019 Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min.
- APTB1615SURKCGKC-F01 1.6 x 1.5 mm Bi-Color SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1.
- Tolerance is ±0.2(0.008") unless otherwise noted.
- The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2.
- Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
- Wavelength at Peak Emission IF = 20mA λpeak Hyper Red Green 645 574 - nm Dominant Wavelength IF = 20mA λdom [1] Hyper Red Green 630 570 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red Green - nm Capacitance C Hyper Red Gree.
- Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad).
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the APTB1615SURKCGKC-F01 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=aptb1615surkcgkc-f01-hk-to-grace-technology