ANTPUK1-433 overview
ANTPUK1-433 is a component documented by rfsolutions.ltd. The PDF description identifies it as "Antenna." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: rfsolutions.ltd
- Part number: ANTPUK1-433
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Flexible Antenna Available as BNC, 4BA, M4 Screw Fixing Available as Straight or Right Angle +3db GAIN ANTENNA +3db GAIN 5/8 Wavelength Whip Antenna Integral Wall Mounting Bracket Supplied With 2 Metres Coax Cable & BNC (50Ω) Note: In Orde.
- Page 5 Antenna SCTM4RA The SCRTM4RA is a PCB mounting terminal providing a simple method of attaching a low cost 4mm Screw thread antenna to a PCB.
- PCB Layout 7.5 5 φ2D I A A A = 5,1mm excluding s crew head, this als o depends on how far the s crew terminal is from the outside surface of the box its fitted into.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ANTPUK1-433 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=antpuk1-433-rfsolutions-ltd