AMS5915 overview
AMS5915 is a component documented by WOLFSPEED, INC. The PDF description identifies it as "Board Mount Pressure Sensor with Digital I2C Output AMS 5915 Rev. 4.0." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: WOLFSPEED, INC.
- Part number: AMS5915
- Category: Interface
- Datasheet length: 15 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- AMS 5915 sensors are extensively c alibrated and co m- pensated across a wide temperature range of -25 to 85 °C.
- 4.0 4/15 MAXIMUM RATINGS Parameter Minimum Typical Maximum Units Maximum supply voltage: VS,max Operating temperature: Top Storage temperature: Tamb Common mode pressure pCM -25 -40 6.0 125 V bar Table 3: Maximum ratings Note: 1) Common mo.
- SPECIFICATIONS All parameters apply to Top = 25 °C and VS = 3.3 V (3.3 V models) or VS = 5.0 V (5 V models), unless otherwise stated.
- 85 °C Ultra low pressure ranges (≤ 10 mbar) ± 2.0 %FSO Low pressure ranges (10 mbar < p ≤ 100 mbar) ± 1.5 %FSO Standard pressure ranges / pneumatic ranges (> 100 mbar) ± 1.0 %FSO Total error for temperature measurement All types of AMS 591.
- 85 °C ± 3.0 %FSO Long term stability 0.2 < 0.5 %FSO/a Resolution A/D converter 14 bits Resolution pressure signal 12 bits Resolution temperature signal 11 bits Supply voltage range (VS) for 3.3 V model 3.0 3.3 3.6 V Supply voltage range (V.
- 4.0 5/15 Parameter Minimum Typical Maximum Units I²C-interface Input high level 80 100 % VS Input low level 0 20 % VS Output low level 0 10 % VS Load capacitance @ SDA 200 pF Clock frequency SCL 100 400 kHz Pull-up resistor 500 Pressure.
- 4) The digital temperature output signal is not ratiometric to the supply voltage.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the AMS5915 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ams5915-wolfspeed-inc