AM42DL1624DT70IT overview
AM42DL1624DT70IT is a component documented by SPANSION. The PDF description identifies it as "Stacked Multi-Chip Package (MCP) Flash Memory and SRAM." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: SPANSION
- Part number: AM42DL1624DT70IT
- Category: Memory
- Datasheet length: 61 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The device is available with access times of 70 ns or 85 ns.
- Flash Alternate CE#f Controlled Write (Erase/Program) Op-** January 9, 2002 Am42DL16x4D 5 PRELIMINARY PRODUCT SELECTOR GUIDE MCP BLOCK DIAGRAM Part Number Am42DL16x4D Speed Options Standard Voltage Range: VCC = 2.7–3.3 V Flash Memory SRAM.
- The package and/or data integrity may be compro- mised if the package body is exposed to temperatures above 150°C for prolonged periods of time.
- If WP#/ACC = VACC (9V), the program time will be reduced by 40%.
- When the time-out period is complete, DQ3 switches from a “0” to a “1.” If the time between addi- tional sector erase commands from the system can be assumed to be less than 50 µs, the system need not monitor DQ3.
- Minimum DC voltage on input or I/O pins is –0.5 V.
- Maximum DC voltage on input or I/O pins is VCC +0.5 V.
Topics covered by the datasheet
The document includes sections related to:
- ORDERING INFORMATION
- Description
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the AM42DL1624DT70IT datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=am42dl1624dt70it-spansion