AGL1000V2-VQ144I overview
AGL1000V2-VQ144I is a component documented by Microsemi Corporation. The PDF description identifies it as "IGLOO Low Power Flash FPGAs with Flash*Freeze Technology." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Microsemi Corporation
- Part number: AGL1000V2-VQ144I
- Category: Memory
- Datasheet length: 250 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Supply Voltage 2 = 1.2 V to 1.5 V 5 = 1.5 V only AGL1000 V2 FG _ Part Number IGLOO Devices Package Type VQ = Very Thin Quad Flat Pack (0.5 mm pitch) QN = Quad Flat Pack No Leads (0.4 mm and 0.5 mm pitch) Y = Device Includes License to Impl.
- C = Commercial temperature range: 0°C to 70°C ambient temperature.
- I = Industrial temperature range: –40°C to 85°C ambient temperature.
- AGL030 Production AGL060 Production AGL125 Production AGL250 Production M1AGL250 Production AGL400 Production AGL600 Production M1AGL600 Production AGL1000 Production M1AGL1000 Production IGLOO Low Power Flash FPGAs Revision 23 V Table of.
- The ability of IGLOO V2 devices to support a wide range of core voltage (1.2 V to 1.5 V) allows further reduction in power consumption, thus achieving the lowest total system power.
- IGLOO devices also have low dynamic power consumption to further maximize power savings; power is even further reduced by the use of a 1.2 V core voltage.
- This is done almost instantly (within 1 µs) and the device retains configuration and data in registers and RAM.
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the AGL1000V2-VQ144I datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=agl1000v2-vq144i-microsemi-corporation