AG102S overview
AG102S is a component documented by Silver Telecom 2019. The PDF description identifies it as "Intelligent Sealed Lead Acid Battery Charger Module." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Silver Telecom 2019
- Part number: AG102S
- Category: IC
- Datasheet length: 15 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- It uses digital technology to optimise the charging of standard, 12V sealed lead acid batteries between 1.2Ah and 7Ah capacity.
- The Ag102 has a very wide input range of 9V to 36V DC.
- This pin connects to a positive dc supply (9V to 36V).
- The charge profile can be further optimised by using thermal compensation (see Section 5.4). © Silver Telecom 2014 V1.6 June 2014 Data Sheet Ag102 Sealed Lead Acid Battery Charger Module The Ag102 has a very wide input range of 9V dc to 36.
- For stable operation it is recommended to fit a 470 μF capacitor across the input pins, as close to these pins as possible.
- For optimum efficiency the input voltage should be set between 12V and 18V.
- Figure 7: STAT Output Configurations Note: Figure 7 shows a 47K pull down resistor, this is required to ensure that the open collector output switches correctly (bu t this is not a critical value), the STAT output can source ~5mA.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the AG102S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ag102s-silver-telecom-2019