979 overview
979 is a component documented by WECO ELECTRICAL CONNECT. The PDF description identifies it as "PCB connector Screw connection, large conductor space 11.17." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: WECO ELECTRICAL CONNECT...
- Part number: 979
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- to EN 60998-1 Rated Current 24 A Hole in PCB ø 1,3 mm Torque 0,5 Nm Other specifications Rated voltage in brackets applies to 5-16-pole connectors, “no-flame” according to glow wire test applies to 2-4-pole connectors.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 979 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=979-weco-electrical-connect