932A-250/102TR5040A overview
932A-250/102TR5040A is a component documented by Thermtrol Corporation. The PDF description identifies it as "SURFACE MOUNT FILM PET HIGH CV." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Thermtrol Corporation
- Part number: 932A-250/102TR5040A
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- Unencapsulated stacked metallized high temperature polyethylene teraphalate (PET) film construction, non-inductive.
- High CV, small sizes in EIA 1206, 1210, 1812, 2220, 2824, 4030, 5040, & 6054.
- Wide temperature range (-55°C ~ +125°C).
- Reflow soldering only.
- Tape/reel package available in all sizes.
- High heat and moisture resistance.
- Stable temperature, frequency and bias characteristics.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Stable temperature, frequency and bias characteristics.
- SPECIFICATIONS Performance Characteristics Operating Temperature Range -55°C ~ +125°C with voltage derating of 1.25%/°C between 105°C & 125°C.
- Withstanding Voltage (between leads) (20°C) 1.4 times rated voltage for 2 seconds.
- Capacitance Range (20°C, 1KHz) 0.001μF ~ 4.7μF.
- Maximum Dissipation Factor % (20°C, 1KHz) <1.0.
- Minimum Insulation Resistance (20°C) (after 1 minute minimum) >1000MΩ measured @ 10VDC for WVDC < 100VDC & measured @ 100VDC for WVDC ≥ 100VDC (C ≤ 0.33μF).
- RECOMMENDED LAND PATTERN DIMENSIONS (mm) Case Code Dimensions L E ± 0.012 W E L T W Part Number Example: 932A-100/104JTR1812A 932A - 100 / 104 J TR 1812 A Type Rated DC Voltage Capacitance Code (μF)* Tolerance Code Package Code** Reel Size.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 932A-250/102TR5040A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=932a-250-102tr5040a-thermtrol-corporation