815212302 overview
815212302 is a component documented by Magnetrol International. The PDF description identifies it as "RF Point Level Switches." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Magnetrol International...
- Part number: 815212302
- Category: IC
- Datasheet length: 28 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Cop yright© 2007 Ma gnetrolInternational.
- The capacitance-controlledoscillatorcircuit, mou nted on theprobe, changesthe capacitance signaltoa variable frequency.T hisstabilized signalcan then be senttothe main electronicslocated up to 5000feet(1500meters) away via standard shielde.
- Kotron RF PointLevelSwitchesshouldbe located foreasy accessforservice, calibration and m onitoring.Switches shouldnotbe exposed to am bienttemp eraturesbelow -40°F (-40°C) orabove+160° F (+71° C).
- Figure1 R ecom m ended HorizontalMo unting Probe Sheath 1" (25 mm) minimum Figure 2 R ecom m ended M ountingwith No zzle Probe Sheath Figure 3 No tR ecom mend ed Figure4 AlternateHorizontalM ounting forViscous Materials 50-605 Kotron RF Po.
- Verticallymo unted probesshouldbe installedsothatthe end oftheprobe rod isatleast2 inches(51mm) below thedesired levelcontrolpointw ith conductivematerialsor 4 inches(102m m ) below w ith non-conductivematerials.
- Kotron RF PointLevelSwitchesw ith probesup toand including 12 inches(305mm ) in length areshipped pre- assembled.Un itsw ith probesover12 inches(305mm) in lengthare shipped unassembled to avoid damage during transit.They m ustbe assembled.
- Cu toffcable1.35inches(34mm) abovetop ofupper probe nutand strip off1.25inches(32mm ) ofinsulation.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 815212302 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=815212302-magnetrol-international