8132100 overview
8132100 is a component documented by Clarke International. The PDF description identifies it as "MIG/MMA/TIG INVERTER WELDER DL01/26 -Rev 3." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Clarke International
- Part number: 8132100
- Category: IC
- Datasheet length: 44 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Model MIG150 Multi Unpacked Weight (kg) 14.3 Dimensions (L x W x H) (mm) 555 x 203 x 300 Power Supply 230V~ 50Hz Connecting plugs (32A) Peak Input Power 5500 W Max Input Current II Max/II eff 24A/13.1A Output Welding Current MIG 30A-140A M.
- The torch is suitable for wire diameters of 0.6-1.0mm.
- The user should purchase a suitable connecting cable capable of handling 32 Amps with a supply plug rated at 32A or better.
- Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com LOOSE ITEMS SUPPLIED INCLUDE THE FOLLOWING: 1 x MIG welding torch with hose (0.8mm tip) 1 x Torch Cable/Electrode Holder 1 x Earth Ca.
- We recommend you cut off and discard the first 10 cm of wire from the spool to avoid any burrs and then straighten the next few centimetres of wire to help with feeding.
- Push about 10-15 cm into the torch liner.
- Refit the appropriate size contact tip (the 0.9 mm tip, for no gas welding is supplied fitted) to suit your wire and replace the shroud.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 8132100 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=8132100-clarke-international