635-9/16 overview
635-9/16 is a component documented by Klein Tools, Inc. The PDF description identifies it as "Drivers SCREW, NUT, MULTI & ADJUSTABLE Rev. 10/17." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Klein Tools, Inc.
- Part number: 635-9/16
- Category: Driver IC
- Datasheet length: 4 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The shafts adjust anywhere from 4" to 8" (10 – 20 cm) for numerous length choices.
- Tips Overall Length 32581 #0 & #00 Phillips and 1/8" & 3/32" Slotted 6.5" (165 mm) 32585 T7, T8, T10 and T15 tamper-proof TORX® 6.5" (165 mm) Wrench Assist Magnetic Tip Cat.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 635-9/16 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=635-9-16-klein-tools-inc