61C-082-R overview
61C-082-R is a component documented by M-System Co.,Ltd. The PDF description identifies it as "Field Network Modules 61-UNIT Series." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: M-System Co.,Ltd.
- Part number: 61C-082-R
- Category: IC
- Datasheet length: 4 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- of channels) (8 points for input, 8 points for output) (Use Installation Base model: M8BS2-164) [3] POWER INPUT AC Power K: 85 – 132 V AC (Operational voltage range 85 – 132 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24.
- Terminating resistor (110 Ω, 0.5 W) GENERAL SPECIFICATIONS Construction: Plug-in Connection CC-Link: Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm2, stripped length 7 mm) I/O: Via Installation Base (model: MxBS2) Power.
- INPUT SPECIFICATIONS ■ Analog Input Input range: 1 – 5 V DC Input resistance: ≥ 1 MΩ (Each input must be isolated by signal conditioners.
- Non- isolated modules such as M2BW and M8BW are not usable.) A/D conversion Moving averaging: 4 samples Sampling rate: 160 ms A/D conversion output: Signed binary Signal range 0 – 100 % is converted into hexadecimal 0000 – 2710 (0 – 10000).
- RWr n+0 through RWr n+15 for 16 inputs. ■ A/D CONVERSION DATA OUTPUT SPECIFICATIONS ■ Analog Output Output range: 1 – 5 V DC Load resistance: 20 kΩ minimum (Output must be isolated with signal conditioners.
- Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (I/O to CC-Link to power) MODEL: 61C 61C SPECIFICATIONS ES-6627 Rev.8 Page 3/4 EXTERNAL VIEW L RUN PU-2 B RATE STATION NO.
Topics covered by the datasheet
The document includes sections related to:
- ORDERING INFORMATION
- RELATED PRODUCTS
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 61C-082-R datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=61c-082-r-m-system-co-ltd