440.35 overview
440.35 is a component documented by FACOM. All rights reser. The PDF description identifies it as "440 OGVJ metric and inch combination wrenches." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: FACOM. All rights reser...
- Part number: 440.35
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Wide range of openings : - Metric sizes : 4 to 41 mm. - Inch sizes : 1/4" to 1 1/2".
- Each production batch undergoes dimensional inspection, as well as static and fatigue mechanical performance, wear and corrosion resistance testing. $ $h 4 mm 41 mm
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 440.35 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=440-35-facom-all-rights-reser