430 overview
430 is a component documented by Intel Corporation. The PDF description identifies it as "Supporting the Intel Celeron processor." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Intel Corporation
- Part number: 430
- Category: IC
- Datasheet length: 100 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Available at 1.60 GHz, 1.8 GHz, 2.00 GHz, S u p p o r t s I n t e l® 64 architecture Supports Execute Disable Bit capability Binary compatible with applications running on previous members of the Intel microprocessor line FSB frequency at.
- Based on 65 nm process technology, the Intel Celeron processor 400 series is a single- core processor that features an 800 MHz front side bus (FSB), 1 MB or 512 KB L2 cache, and a thermal design power (TDP) of 35 W.
- Under these conditions, processor lands should not be connected to any supply voltages, have any I/Os biased, or receive any clocks.
- In addition, ceramic decoupling capacitors are required to filter high frequency content generated by the front side bus and processor activity.
- A conservative decoupling solution would consist of a combination of low ESR bulk capacitors and high frequency ceramic capacitors.
- In addition, some of the high frequency capacitance required for the FSB is included on the processor package.
- However, additional high frequency capacitance must be added to the motherboard to properly decouple the return currents from the front side bus.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Revision History
- Description
- Features
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 430 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=430-intel-corporation