410M overview
410M is a component documented by Morse Mfg. Co., Inc. The PDF description identifies it as "Heavy-Duty Hydra-Lift Karriers 23 Dec, 2021." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Morse Mfg. Co., Inc.
- Part number: 410M
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Option X03-410 Factory installed 16” (40.6 cm) Diameter Hand Wheel (not shown) on 410 Series with manual tilt control.
- Maximum pouring height is 72” (183 cm).
- Model 410-110 with 72” (183 cm) dispensing height and electric power lift and tilt.
- Easy maneuverability on four 4” (10.2 cm) nylon swivel casters under the base.
- Drum Handling System Automatically adjusts for 22” to 23.5” (56 to 59.7 cm) • diameter drum Accepts Diameter Adaptors for your smaller drum• Accepts bolt-on Top Rim Clamp or Bracket • Assembly to handle a plastic or fiber drum Includes a f.
- Option # G-400 The optional 3-Piece Drum Holder is for handling only a 22.5” (57 cm) diameter 55-gallon (208 liter) steel drum.
- Optional 3-Piece Drum Holder Model # Motor Type Motor Control 410-110 AC, 1HP/115V, TEFC Switch, Cord, Plug 410-114 Air, Vane Type On/Off Valve 410M-114 Air, Vane Type On/Off Valve 410-115 DC, 12V Built-in Model # Motor Type Motor Control.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 410M datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=410m-morse-mfg-co-inc