40N60SCD1 overview
40N60SCD1 is a component documented by IXYS Corporation. The PDF description identifies it as "CoolMOS Power MOSFET with Series Schottky Diode and Ultra Fast Antiparallel Diode in High Voltage ISOPLUS i4-PACTM." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: IXYS Corporation
- Part number: 40N60SCD1
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- g. - phaseleg with inductive load - resonant circuits high switching frequency Examples switched mode power supplies (SMPS) uninterruptable power supplies (UPS) DC-DC converters welding converters converters for inductive heati.
- ID25 = 38 A VDSS = 600 V RDSon = 60 m ΩΩΩΩΩ trr = 70 ns MOSFET T Symbol Conditions Maximum Ratings VDSS TVJ = 25°C to 150°C 600 V VGS ±20 V ID25 TC = 25°C 38 A ID90 TC = 90°C 25 A Symbol Conditions Characteristic Values (TVJ = 25°C, unless.
- Cp coupling capacity between shorted pins and mounting tab in the case 40 pF dS, dA D pin - S pin 7 mm dS, dA pin - backside metal 5.5 mm Weight 9g Series Schottky Diode DS Symbol Conditions Maximum Ratings IF25 TC = 25°C 60 A IF90 TC = 90.
- VF IF = 20 A; TVJ = 25°C 0.9 V TVJ = 125°C 0.7 V RthJC 2 K/W RthJH with heat transfer paste 2.9 K/W Anti Parallel Diode DF Symbol Conditions Maximum Ratings I F25 TC = 25°C 32 A IF90 TC = 90°C 16 A Symbol Conditions Characteristic Values (.
- VF IF = 20 A; TVJ = 25°C 2.1 2.5 V TVJ = 125°C 1.4 V IRM IF = 30 A; diF/dt = -500 A/µs; TVJ = 125°C 15 A trr VR = 600 V; VGE = 0 V 70 ns RthJC 1.3 K/W RthJH with heat transfer paste 2.6 K/W
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 40N60SCD1 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=40n60scd1-ixys-corporation