407 overview
407 is a component documented by CTS Corporation. The PDF description identifies it as "Surface Mount Quartz Crystal." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: CTS Corporation
- Part number: 407
- Category: Interface
- Datasheet length: 3 Pages
Key features noted in the PDF
- Standard 7.0x5.0mm Surface Mount Footprint
- Stable Frequency Over Temperature and Drive Level
- Frequency Range 8 – 100 MHz
- Frequency Tolerance, ±30 ppm Standard (±10 ppm and ±20 ppm available)
- Frequency Stability, ±50 ppm Standard (±10,±20,±30 and ±40 ppm available)
- Operating Temperature to –40°C to +85°C
- Tape & Reel Packaging, EIA-481-2 Compliant
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Frequency is recorded with minimum 4 significant digits to the right of the "M".
- XXXMXXXX – Frequency marked with 4 significant digits after the ‘M’.
- Complete CTS part number, frequency value and date code information must appear on reel and box labels.
- ENVIRONMENTAL SPECIFICATIONS Temperature Cycle: 400 cycles from –55°C to + 125°C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures.
- Mechanical Shock: 1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks).
- Sinusoidal Vibration: 0.06 inches do uble amplitude, 10 to 55 Hz and 20 g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total).
- Gross Leak: No leak shall appear while imme rsed in an FC40 or equivalent liquid at +125°C for 20 seconds.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- ORDERING INFORMATION
- DESCRIPTION
- ELECTRICAL CHARACTERISTICS
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 407 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=407-cts-corporation