380 overview
380 is a component documented by Intel Corporation. The PDF description identifies it as "Celeron M Processor on 90 nm Process." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Intel Corporation
- Part number: 380
- Category: IC
- Datasheet length: 68 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The clock chip will drive BCLK to differential DC levels within 2-3 ns and starts toggling BCLK 2-6 BCLK periods later.
- BCLK[1:0] directly controls the FSB interface speed as well as the core frequency of the processor.
- As in previous generation processors, the Celeron M processor core frequency is a multiple of the BCLK[1:0] frequency.
- The Celeron M processor uses six voltage identification pins, VID[5:0], to support automatic selection of power supply voltages.
- If the external thermal sensor detects a catastrophic processor temperature of 125°C (maximum), or if the THERMTRIP# signal is asserted, the V CC supply to the processor must be turned off within 500 ms to prevent permanent silicon damage.
- The BSEL[1:0] signals are used to select the frequency of the processor input clock (BCLK[1:0]).
- Static and ripple tolerances (for minimum and maximum voltages) are defined in the loadline tables i.e., Table 5 through Table 7.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Revision History
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 380 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=380-intel-corporation