362S overview
362S is a component documented by IDEAL-TEK SA. The PDF description identifies it as "High Precision Scissors REV.00." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: IDEAL-TEK SA
- Part number: 362S
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Tip description: straight, extra fine Coating/finishing: Sandblasted Body material: Stainless Steel (S) Picture: Product dimensions: OAL 90.0 mm – 3.543 inch Width 45.0 mm – 1.772 inch Height 5.0 mm – 0.197 inch a Tip dimensions: Tip width.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 362S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=362s-ideal-tek-sa