3628 overview
3628 is a component documented by Lumberg. The PDF description identifies it as "RAST-5-Steckverbinder, Raster 5,0 mm." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Lumberg
- Part number: 3628
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Mechanische Daten Steckkraft/Kontakt1 ≤ 4,0 N Ziehkraft/Kontakt1 ≥ 1,0 N Kontaktierung mit Flachmesser 6,3 x 0,8 mm nach DIN 46244, Messerleiste 3647 auf Anfrage, Messerleisten nach RAST-5-Standard Anschließbare Leiter Schneidklemmbereich.
- Elektrische Daten Durchgangswiderstand ≤ 5 mΩ Bemessungsstrom 12 A bei T U 70 °C Bemessungsspannung2 250 V AC Isolierstoffgruppe2 II (CTI ≥ 450) Kriechstrecke ≥ 3,2 mm Luftstrecke ≥ 3,2 mm Isolationswiderstand > 10 G Ω 1 gemessen mit einem.
- Mechanical data Insertion force/contact1 ≤ 4.0 N Withdrawal force/contact1 ≥ 1.0 N Mating with tab 6.3 x 0.8 mm according to DIN 46244, tab header 3647 on request, tab headers acc.
- Electrical data Contact resistance ≤ 5 mΩ Rated current 12 A at T amb 70 °C Rated voltage2 250 V AC Material group2 II (CTI ≥ 450) Creepage distance ≥ 3.2 mm Clearance ≥ 3.2 mm Insulation resistance > 10 G Ω 1 measured with a polished flat.
- Température d’utilisation -40 °C/+110 °C 2.
- Caractéristiques mécaniques Force d’insertion/contact1 ≤ 4,0 N Force de séparation/contact1 ≥ 1,0 N Raccordement avec fiche plate, 6,3 x 0,8 mm suivant DIN 46244, réglette à couteaux 3647 sur demande, réglettes à couteaux suivant standard.
- Caractéristiques électriques Résistance de contact ≤ 5 mΩ Courant assigné 12 A à T amb 70 °C Tension assignée2 250 V AC Groupe de matériau2 II (CTI ≥ 450) Distance d’isolement ≥ 3,2 mm Ligne de fuite ≥ 3,2 mm Résistance d’isolement > 10 G.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 3628 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=3628-lumberg