35449381 overview
35449381 is a component documented by Aptiv. The PDF description identifies it as "CTS 1.2 SensoMate™ SERIES." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Aptiv
- Part number: 35449381
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- One piece molded housing to ensure best in class sealing performance (short shroud version)
- Increased sealing performance through a unique 3 rib robust seal design (175°C version)
- Patented Smart Locking System version of the CPA to improve assembly cycle time (short shroud version)
- Compatible with wire dress back shells (short shroud version) CTS 1.2 3W F short shroud CPA Type 2 CTS 1.2 3W F short shroud CPA Type 1 Male 3W CTS 1.2 3W F long shroud
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Visit aptiv.com CTS 1.2 SensoMate™ SERIES BENEFITS VDA/USCAR 1.2 mm at 4 mm pitch interface compatible (universal) Industry standard 1.2 terminal cavity capability Short shroud design for small packaging footprint and long shroud design fo.
- TEMPERATURE VIBRATION 42G SEALING CLASS +150°C -40°C Chassis, Engine compartment, On-Engine-Mount, Severe Gearbox Applications, Sensors/Actuators IPX9K IP68 500 mBars sine on short shroud versions 10 V up to 48V up to 175°C VDA INTERFACE U.
- EXPLODED VIEW CS-SP54-CTS-En0224 Connector Position Independent Secondary Seal COMPATIBLE WITH Cavity count Blade size Gender Part number Temperature Class CPA Shroud Clip Slot Dimensions (W x H x D) Index Other Indexes offered 1.2 F 35126.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
- FEATURES
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 35449381 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=35449381-aptiv