354202 overview
354202 is a component documented by Lumberg. The PDF description identifies it as "RAST-2.5-Steckverbinder, Raster 2,5/5,0 mm." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Lumberg
- Part number: 354202
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- B339 RAST-2.5-Stiftleiste, in Schneidklemmtechnik (SKT), mit Verriegelungslasche Kontaktraster 5,0 mm 1.
- Elektrische Daten (bei T U 20 °C) Durchgangswiderstand ≤ 5 mΩ Bemessungsstrom 4 A bei T U 60 °C Bemessungsspannung2 250 V AC Isolierstoffgruppe2 IIIa (CTI ≥ 250) Kriechstrecke ≥ 3,0 mm Luftstrecke ≥ 3,0 mm Isolationswiderstand > 1 G Ω 1 Ba.
- Electrical data (at T amb 20 °C) Contact resistance ≤ 5 mΩ Rated current 4 A at T amb 60 °C Material group2 IIIa (CTI ≥ 250) Creepage distance ≥ 3.0 mm Clearance ≥ 3.0 mm Insulation resistance > 1 G Ω 1 component glow wire resistant (GWT 7.
- to IEC 60335-1 (flame < 2 s) 2 according to DIN EN 60664/IEC 60664 being connected to RAST 2.5 con- nector Réglette à broches RAST 2.5, technologie de déplacement d’isolant, avec languette de verrouillage pas des contacts 5,0 mm 1.
- Température d’utilisation -40 °C/+130 °C 2.
- Caractéristiques électriques (à T amb 20 °C) Résistance de contact ≤ 5 mΩ Courant assigné 4 A à T amb 60 °C Tension assignée2 250 V AC Groupe de matériau2 IIIa (CTI ≥ 250) Distance d’isolement ≥ 3,0 mm Ligne de fuite ≥ 3,0 mm Résistance d’.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 354202 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=354202-lumberg