301S43W474KV6E overview
301S43W474KV6E is a component documented by Johanson Technology Inc. The PDF description identifies it as "TIP & RING CHIP CAPACITORS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Johanson Technology Inc...
- Part number: 301S43W474KV6E
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 474 = 0.47 µF 105 = 1.00 µF 474 TOLERANCE K = ± 10% M = ± 20% Z = +80% -20% M CAPACITANCE SELECTION - 0805-1808 SIZE Please contact the factory for capacitance, voltage, case size combinations not shown.
- VS TEMPERATURE TEMPERATURE COEFFICIENT: ± 15%, -55 to +125°C DISSIPATION FACTOR: For ≥50 Volts: 2.5% max For 25 Volts: 3.0% max For 16 Volts: 3.5% max AGING: 2.5% / decade hour INSULATION RESISTANCE: 1000 ΩF or 100 GΩ,whichever is less @ 2.
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 301S43W474KV6E datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=301s43w474kv6e-johanson-technology-inc