3013W3PAM62A10X overview
3013W3PAM62A10X is a component documented by CONEC Elektronische Bau. The PDF description identifies it as "D-SUB COMBINATION MALE 13W3P SOLDER CUP 27.10.11." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: CONEC Elektronische Bau...
- Part number: 3013W3PAM62A10X
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- HIGH POWER CONTACTS 20A: COPPER ALLOY PLATING MATING AREA: GOLD over NICKEL PLATING TERMINATION SIDE: GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 12 - 14 5.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 3013W3PAM62A10X datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=3013w3pam62a10x-conec-elektronische-bau