3003 overview
3003 is a component documented by NXP Semiconductors. The PDF description identifies it as "RF Manual 16th edition June 2012." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: NXP Semiconductors
- Part number: 3003
- Category: IC
- Datasheet length: 130 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Application diagram Product highlight: BLF8G10LS-160 multi-carrier applications at frequencies from 920 to 960 MHz. \
Excellent ruggedness \High efficiency \Low Rth providing excellent thermal stability \Designed for broadband opera. - The BGA7210 adds flexible current distribution across its two amplifiers, depending on the attenuation state, to save current. \
Internally matched for 50 Ω - BGA7204 = 0.4 to 2.75 GHz - BGA7210 = 0.7 to 3.8 GHz \High maximum power gain. - It is housed in a 32-pin leadless HVQFN package (5 x 5 mm). \
Dual independent digitally controlled 24 dB gain range VGAs, with 5-bit control interface \50 to 250 MHz frequency operating range \Gain step size: 1 dB ± 0.1 dB \18.5 dB. - The device covers frequency bands from 1700 to 2700 MHz with an extremely flat behavior. \
8.5 dB conversion gain over all bands \13 dBm input, 1 dB compression point \25.5 dBm input third-order intercept point \10 dB (typ) small si. - This 1 GHz hybrid amplifier solution offers an extended temperature range, high-power overstress capabilities in case of surges, and high ESD levels.
- The BGU703x family operates at a supply voltage of 5 V and is intended for use with normal can tuners.
- The BGU704x family operates at 3.3 V and works seamlessly with our Si tuner ICs, which also operate at 3.3 V.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Datasheet sections
- Features
- applications
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 3003 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=3003-nxp-semiconductors