2600339 overview
2600339 is a component documented by Henkel Corporation. ALL. The PDF description identifies it as "LOCTITE® EA 3450 2014." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Henkel Corporation. ALL...
- Part number: 2600339
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- TYPICAL PROPERTIES OF UNCURED MATERIAL Resin: Specific Gravity @ 25 °C 1.7 Casson Viscosity @ 25 °C, Pa∙s Plate-plate Flash Point - See SDS Hardener: Specific Gravity @ 25 °C 1.8 Casson Viscosity @ 25 °C, Pa∙s Plate-plate Flash Point - See.
- The graph below shows the shear strength developed with time on grit blasted steel lap shears at different temperatures and tested according to ISO 4587. % Initial Strength @ 22 °C Cure Time, hours 140 120 100 0.5 1 3 6 12 24 72 168 22 °C.
- Join the adhesive coated surfaces and allow to cure at 25 °C for 24 hours for high strength.
- Heat up to 93 °C, will speed curing.
- Maximum shear strength is obtained with a 0.1 to 0.2 mm bond line.
- Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 2600339 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=2600339-henkel-corporation-all