2100 overview
2100 is a component documented by Systemsensor advanced i. The PDF description identifies it as "Photoelectronic Smoke Detectors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Systemsensor advanced i...
- Part number: 2100
- Category: IC
- Datasheet length: 4 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Specifications Diameter: 5.5 inches (140 mm) Height (including mounting bracket): 1.7 inches (43 mm) Weight: 5.3 oz. (150 g) Operating Temperature Range: Model 2100: 32 ° to 120°F (0° to 50°C) Model 2100T: 32 ° to 100°F (0° to 39°C) Operat.
- Voltage (peak to peak) Start-up Capacitance: 0.02 µF maximum Standby Current: 50 µA maximum Alarm Ratings: 4.2 VDC minimum at 10 mA.
- 6.6 VDC maximum at 100 mA. (Alarm current must be limited to 100 mA maximum by the control panel.
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 2100 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=2100-systemsensor-advanced-i