16N50 overview

16N50 is a component documented by Unisonic Technologies. The PDF description identifies it as "16 Amps, 500 Volts N-CHANNEL POWER MOSFET." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Unisonic Technologies
  • Part number: 16N50
  • Category: IC
  • Datasheet length: 6 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • The UTC 16N50 is generally applied in high efficiency switch mode power supplies, active power factor correction and electronic lamp ballasts based on half bridge topology. „ FEATURES * 16A, 500V, RDS(ON)=0.38Ω @ VGS=10V * High Switching S.
  • L = 5.5mH, I AS = 16A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C 5.
  • I SD ≤ 16A, di/dt ≤ 200A/µs, VDD ≤ BVDSS, Starting TJ = 25°C „ THERMAL DATA PARAMETER SYMBOL RATINGS UNIT Junction to Ambient θJA 62.5 °C/W Junction to C a s e θJC 2.4 °C/W 16N50 Preliminary Power MOSFET UNISONIC TECHNOLOGIES CO., LTD 3 of.
  • a „ ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OFF CHARACTERISTICS Drain-Source Breakdown Voltage BV DSS I D=250µA, VGS=0V 500 V Drain-Source Leakage Current I DSS V D.
  • Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2% 7.
  • a „ TEST CIRCUITS AND WAVEFORMS 50kΩ 300nF DUT VDS 10V12V Charge QGS QGD QG Gate Charge Test Circuit Gate Charge Waveforms VGS VGS 200nF Same Type as DUT 3mA 10V tP RG DUT L VDS ID VDD Unclamped Inductive Switching Test Circuit tP VDD IAS.

Engineering review checklist

  • Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
  • Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
  • Review package thermal resistance, copper area, polarity marking and transient derating before layout release.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the 16N50 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=16n50-unisonic-technologies

16N50 Unisonic Technologies IC 16N50 datasheet 16N50 specifications 16N50 applications