16D-9 overview
16D-9 is a component documented by List of Unclassifed Man. The PDF description identifies it as "THERMOPILE TYPE INFRARED SENSOR." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: 16D-9
- Category: Sensor
- Datasheet length: 44 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- M /H9024 Pa•m 3/ s k/H9024 K mW Size of Absorbing Film Reference Johnson Noise r.m.s.,298K 1Hz Typical Output Voltage/Johnson Noise, Typical Typical Typical Typical Standard Incident Angle to Ahieve 50% Responsivity Rated zero-power resist.
- Operating temperature of up 150/H11034C .
- Epoxy Color code The AT thermistor is a high-precision thermal sensing device featuring extremely small B-value tolerance and resistance.
- We offer IT thermistor with /H110062% tolerance for a resistance value of 25/H11034C and /H110061% for B value.
- Our HT thermistors are adapted metal electrodes packaged in a resin mold, unlike conventional chip thermistors, and can offer /H110062% tolerance for a resistance value at 25/H11034C.
- Criteria Free Fall Test Test Conditions 3 natural drops from 75 cm high JIS C2571 Item A Deviation of resistance at 25/H11034C from the original value after test within /H110062% and deviation of B value(B25/H1140885) from the original val.
- Variable type of sensor can be utilized for detecting or controlling temperature because its operating temperature range is wide from /H1100250 to /H11001300/H11034C.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Applications
- Electrical Characteristics
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 16D-9 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=16d-9-list-of-unclassifed-man