160FB overview
160FB is a component documented by Numonyx B.V. The PDF description identifies it as "Top / Bottom Boot Block 5 V Supply Flash Memory." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Numonyx B.V
- Part number: 160FB
- Category: Memory
- Datasheet length: 67 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- TSOP48 – 48 lead Plastic Thin Small Outline, 12 x 20mm, Package Mechanical Data. . .
- Programmer Technique Bus Operations, BYTE = V** Description M29FxxxFT, M29FxxxFB The following overview of the Numonyx® Axcell™ M29F 5 V Flash Memory device (M29W160F) refers to the 16-Mbit device.
- These operations can be performed using a single low voltage (4.5 to 5.5 V) supply.
- The memory is offered in TSOP48 (12 x 20mm), SO44 , and TFBGA48 (0.8 mm pitch) packages.
- The VCC Supply Voltage supplies the power for all operations (Read, Program, Erase etc.).
- The Command Interface is disabled when the VCC Supply Voltage is less than the Lockout Voltage, VLKO.
- Signal Descriptions M29FxxxFT, M29FxxxFB A 0.1µF capacitor should be connected between the VCC Supply Voltage pin and the VSS Ground pin to decouple the current surges from the power supply.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- Features
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 160FB datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=160fb-numonyx-b-v