135.0.0000.00 overview
135.0.0000.00 is a component documented by Bernstein-Werkzeugfabri. The PDF description identifies it as "Aluminium enclosures CA series." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Bernstein-Werkzeugfabri...
- Part number: 135.0.0000.00
- Category: IC
- Datasheet length: 18 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Silicone lid gasket Improved temperature range (-50 °C to +130 °C).
- Pg threads 58 x 64 x 36 mm CA-060 Aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CA-020 50 x 45 x 30 Part number 102.0.0000.00 l 102.0.0100.00 102.0.0060..
- Pg threads 125 x 80 x 57 mm CA-150 Aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CA-140 280 75 x 80 x 57 Part number 114.0.0000.00 l 114.0.0860.00 114.0..
- Pg threads 122 x 122 x 80 mm CA-210 Aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CA-190 710 250 x 80 x 57 Part number 119.0.0000.00 l 119.0.0480.00 119..
- Pg threads 220 x 122 x 80 mm CA-240 Aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CA-235 1410 220 x 122 x 90 Part number 123.0.0000.50 l 123.0.0010.50 12.
- Pg threads 260 x 160 x 90 mm CA-300 Aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CA-290 1960 260 x 160 x 90 Part number 129.0.0000.00 l 129.0.0010.00 12.
- Pg threads 280 x 230 x 110 mm CA-370 Aluminium enclosure * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CA-360 3680 200 x 230 x 180 Part number 136.0.0000.00 l 136.0.0010.00.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 135.0.0000.00 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=135-0-0000-00-bernstein-werkzeugfabri