10SQ050 overview
10SQ050 is a component documented by Yangzhou yangjie electr. The PDF description identifies it as "SCHOTTKY BARRIER RECTIFIERS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Yangzhou yangjie electr...
- Part number: 10SQ050
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Lt <— «For use low voltage,high frequency inverters, free 360(9.1) wheeling,and polarity protection applications 340(8.6) Mechanical Data «Case:JEDEC R-6 Mo ded plastic 1.0(25.4) «Polarity:Color band cenotes cathode MIN. *Weight:0.07 ounce.
- Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified.
- Single phase, half wave, 60HZ, resistive or inductive load.
- For capacitive load, derate current by 20% Maximum Average Forward IF(AV) 10 A Rectified Current@TA = 75 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Super imposed on Rated Load | IFSM 275 A (JEDEC method) Maximun DC Reverse.
- 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0VDC.
- RATING AND CHARACTERISTIC CURVES gn y ® FIG.2- MAXIMUN NON-REPETITIVE FIG.1- FORWARD CURRENT DERATING CURVE SURGE CURRENT 12.0 2795 | £ = i 4 8.3ms Single Half Wave E 10.0 TTTyN a JEDEC Method 7 \\ ~ 25 \\ 3 soot NLL TE = \\ O i 2 °° \\\\.
- vs ee ll i SR) ESOC SS ; NN ll 0 50 100 150 200 1 2 5 10 20 50 100 CASE TEMPERATURE.("C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL REVERSE CHARACTERISTIC FIG.4-TYPICAL INSTANTANEOVS FORWARD arf 7 CHARACTERISTIC — sot _— ee ee ee ee eee ad SS.
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 10SQ050 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=10sq050-yangzhou-yangjie-electr