100X07N104MT4T overview
100X07N104MT4T is a component documented by Johanson Technology Inc. The PDF description identifies it as "X2Y짰 FILTER & DECOUPLING CAPACITORS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Johanson Technology Inc...
- Part number: 100X07N104MT4T
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Insulation Resistance (Min. @ 25°C, WVDC) C≤ 0.047µF: 1000 ΩF or 100 GΩ, whichever is less C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less Test Conditions: C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS Other: See main catalog page 18 for additional.
- Parameter X2Y ® 10nF Discrete 10nF, 2 @ 220 pF Comments DC offset shift < 0.1 µV < 0.1 µV Referred to input Common mode rejection 91 dB 92 dB Source: Analog Devices, “A Designer’s Guide to Instrumentation Amplifiers (2nd Edition)” by Charl.
- The low inductance of the capacitors extends their high frequency attenuation considerably over discrete MLCs.
- Low ESL delivers improved High Frequency performance into the GHz range.
- Power Ground G1 G2 A B GSM RFI Attenuation in Audio & Analog GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse rate of 217Hz.
- Testing was conducted where an 840MHz GSM handset signal was delivered to the inputs of three different amplifier test circuit configurations shown below whose outputs were measured on a HF spectrum analyzer.
- 1) No input filter, 2 discrete MLC 100nF power bypass caps.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 100X07N104MT4T datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=100x07n104mt4t-johanson-technology-inc