0900-2000 overview
0900-2000 is a component documented by Bivar, Inc. The PDF description identifies it as "IP67 Rigid Heavy Duty Light Pipe 01/18/2021." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Bivar, Inc.
- Part number: 0900-2000
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Manufacturer or author: kbaron PDF pages: 2 .531IN 13.5mm REF. .390in+ .003 .002 9.9mm+ 0.1 0.1 .53IN 13.5mm REF.
- DESCRIPTION DATE APPROVED A ENGINEERING RELEASE 1/18/2021 A.V.
- B Updated Component Tables 2/16/2021 A.V.
- ANGLED LIGHT PIPE PART NUMBER CONFIGURATION RHD-XXXX-XXXX-F9PX67PR LENGTH (L) SEE TABLE 1, PAGE 2 LENS APPEARANCE SEE TABLE 3, PAGE 2 9mm LENS HEIGHT (H) SEE TABLE 1, PAGE 2 ANGLED LIGHT PIPE CONFIGURATION VERTICAL LIGHT PIPE CONFIGURATION.
- MOUNTING HARDWARE SHIPPED NON-ASSEMBLED 9mm LENS LENS APPEARANCE SEE TABLE 3, PAGE 2 LENGTH (L) SEE TABLE 2, PAGE 2 VERTICAL LIGHT PIPE PART NUMBER CONFIGURATION RHD-XXXX-F9PX67PR .47IN 12.0mm REF.
- LIGHT PIPE INCLUDED WASHER M10X1.0 THIN NUT INCLUDED LENS CAP SPLIT LOCK RIGID SEALING RING PRE-INSTALLED .154IN 3.9mm SQUARE RECOMMENDED LENS MOUNTING HOLE 0.059" [1.5mm] - 0.236" [6.0mm] Panel Thickness 0.25Nm Mounting Torque .36IN 9.1mm.
- 0.8mmR.03IN .154IN 3.9mm SQUARE .50IN 12.6mm FLANGE DIAMETER .36IN 9.1mm LENS DIAMETER C CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING 22SHEET # OF DRAWING NO: REVISION: RHD-XXXX-XXXX-F9PX67PR SCALE: 2:1SHEET SIZE: CAGE CODE: 32559 A TABL.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 0900-2000 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=0900-2000-bivar-inc