06020293 overview
06020293 is a component documented by Testo SE & Co. KGaA. The PDF description identifies it as "Multi-function measuring instrument." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Testo SE & Co. KGaA
- Part number: 06020293
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- General technical data Operating temperature -20 to +50 °C Storage temperature -30 to +70 °C Dimensions 220 x 74 x 46 mm Battery type Alkali manganese, mignon, Type AA Battery life 200 h (typical vane measurement) Weight 428 g Housing mate.
- Sensor types testo 435-1/-2/-3/-4 NTC Measuring range -50 to +150 °C Accuracy ±1 digit ±0.5% of mv (remaining range) Resolution 0.1 °C Type K (NiCr-Ni) -200 to +1370 °C (remaining range) 0.1 °C Type T (Cu-CuNi) -200 to +400 °C (remaining r.
- with surface probe; calibration points +60°C; +120°C; +180°C ISO calibration certificate humidity Calibration points 11.3 %RH and 75.3 %RH at +25 °C ISO calibration certificate pressure differential pressure; 5 points distributed over meas.
- impulse trickle charging, integrated discharge function, with built-in international mains plug, 100-240 V, 300 mA, 50/60 Hz testovent 415, volume flow funnel, Ø 210 mm/210x210 mm, incl.
- case testovent 417 funnel set for plate outlets (Ø 200 mm) and funnel for ventilator (330 x 330 mm) for ingoing and outgoing air Connection hose; silicone; 5 m long; max.
- adapter for Testo humidity probes, quick checks or calibration of humidity probe Sintered PTFE filter, Ø 12 mm, for corrosive media, High humidity range (long-term measurements), high flow velocities.
- probe, 100 mm diameter, for measurements with funnel set 0563 4170 Absolute pressure probe 2000 hPa Thermal velocity probe with built-in temperature and humidity measurement, Ø 12 mm, with telescopic handle (max.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the 06020293 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=06020293-testo-se-co-kgaa