ZXT1053AK
Document overview
- Manufacturer or author: Diodes Inc
- PDF pages: 7
Technical content
Features
BV CEO > 75V I C = 5A high Continuous Collector Current Up to 10A Peak Current R SAT = 70mΩ for a low equivalent On-Resistance Low Saturation Voltage h FE specified up to 10A for a high gain hold up Lead-Free Finish; RoHS compliant (Note 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) Mechanical Data Case: TO252 (DPAK) Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads; Solderable per MIL- STD-202, Method 208 Weight: 0.34 grams (approximate) Application DC – DC converters Power Switches Motor Control Automotive Circuits Inverter Circuits Ordering Information (Notes 4 & 5) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel ZXT1053AKTC AEC-Q101 ZXT1053A 13 16 2,500 ZXT1053AKQTC Automotive ZXT1053A 13 16 2,500 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more in formation about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q10x qualified and are PPAP capable. Automotive, AEC-Q10x and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html Marking Information Top View Device Symbol Top View Pin-Out ZXT1053AK = Product Type Marking Code YYWW = Date Code Marking YY = Last Digit of Year (ex: 09 = 2009) WW = Week Code (01 – 53) TO252 YYWW ZXT 1053A Green C E B
Document number: DS33644 Rev. 5 - 2 2 of 7 www.diodes.com November 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXT1053AK Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Value Unit Collector-Base Voltage VCBO 150 V Collector-Emitter Voltage VCEO 75 V Emitter-Base Voltage VEBO 7 V Continuous Collector Current IC 5 A Peak Pulse Collector Current ICM 10 A Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Value Unit Power Dissipation (Note 6) PD 2.1 W (Note 7) 3.4 (Note 8) 4.0 Thermal Resistance, Junction to Ambient Air (Note 6) RθJA C/W(Note 7) 36 (Note 8) 32 Thermal Resistance, Junction to Leads (Note 9) RθJL 2.97 C/W Operating and Storage Temperature Range TJ, TSTG -55 to +150 C ESD Ratings (Note 10) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with the exposed collector pad on 25mm x 25mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 7. Same as note (6), except the device is surface mounted on 25mm x 25mm with 2oz copper. 8. Same as note (6), except the device is surface mounted on 50mm x 50mm with 2oz copper. 9. Thermal resistance from junction to solder-point (at the end of the collector lead). 10. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
Document number: DS33644 Rev. 5 - 2 3 of 7 www.diodes.com November 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXT1053AK Thermal Characteristics and Derating Information 100µ 1m 10m 100m 1 10 100 1k0 0.1 1 10 10010m 100m 100m 1 10 10010m 100m Tamb=25°C 25mm x 25mm 1oz FR4 VCE(sat ) Limit 100µs 1ms 10ms 100ms DC Safe Operating Area IC Collector Current (A) VCE C ollector-E mitter Voltage (V) 0 20 40 60 80 100 120 140 1600.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 50mm x 50mm 2oz FR4 25mm x 25mm 1oz FR4 Derating Curve Temperature (°C) Max P ower Dissipation (W) 100µ 1m 10m 100m 1 10 100 1k0 Tamb=25°C 25mm x 25mm 1oz FR4 Transient Thermal Impedance D=0.5 D=0.2 D=0.1 Single P ulse D=0.05 Thermal Resistance (°C/W)Pulse Width (s) 100µ 1m 10m 100m 1 10 100 1k1 100 25mm x 25mm 1oz FR4 50mm x 50mm 2oz FR4 Safe Operating Area Single Pulse Tamb=25°C Pulse Pow er Dissipation Pulse Width (s) Max P ower Dissipation (W) D=0.1 D=0.05 Single PulseD=0.2 D=0.5 Tamb=25°C 50mm x 50mm 2oz FR4 Transient Thermal Impedance Pulse Width (s) Thermal R esistance (°C /W) Tamb=25°C 50mm x 50mm 2oz FR4 100µs 1ms 10ms 100ms DC VCE(sat ) Limit VCE Collector-Emitter Voltage (V) IC Collector Current (A)
Document number: DS33644 Rev. 5 - 2 4 of 7 www.diodes.com November 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXT1053AK Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Min Typ. Max Unit Test Condition Collector-Base Breakdown Voltage BVCBO 150 240 — V IC = 100µA Collector-Base Breakdown Voltage BVCES 150 240 — V IC = 100µA Collector-Emitter Breakdown Voltage (Note 11) BVCEO 75 90 — V IC = 10mA Collector-Emitter Breakdown Voltage BVCEV 150 240 — V IC = 1µA, VEB = 1V Emitter-Base Breakdown Voltage BVEBO 7 8.7 — V IE = 100µA Collector Cutoff Current ICBO — <1 10 nA VCB = 120V Emitter Cutoff Current IEBO — <1 10 nA VEB = 6V Emitter Cutoff Current ICES — <1 10 nA VCE = 120V DC current transfer Static ratio (Note 9) hFE 260 300 375 450 1200 IC = 10mA, VCE = 2V IC = 1A, VCE = 2V IC = 5A, VCE = 2V IC = 10A, VCE = 2V Collector-Emitter Saturation Voltage (Note 11) VCE(sat) 120 140 350 160 190 460 mV I C = 0.2A, IB = 20mA IC = 1A, IB = 100mA IC = 1A, IB = 10mA IC = 2A, IB = 100mA IC = 5A, IB = 200mA Base-Emitter Saturation Voltage (Note 11) VBE(sat) — 1.0 1.1 V IC = 5A, IB = 200mA Base-Emitter Turn-on Voltage (Note 11) VBE(on) — 0.925 1.05 V IC = 5A, VCE = 2V Transitional Frequency fT — 140 — MHz IC = 50mA, VCE = 10V f = 100MHz Output capacitance COBO — 21 30 pF VCB = 10V, f = 1MHz, Switching times tON tOFF — 162 900 — nS IC = 2A, VCC = 50V, IB1 = IB2 = 20mA Notes: 11. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤2%.
Document number: DS33644 Rev. 5 - 2 5 of 7 www.diodes.com November 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXT1053AK Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) 1m 10m 100m 1 10 10m 100m 100m 10.0 0.2 0.4 0.6 0.8 1.0 1m 10m 100m 1 100.0 0.2 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 0.4 0.6 0.8 1.0 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 100 200 300 400 500 600 IC/IB=200 IC/IB=100 VCE(SAT) v IC Tamb=25°C IC/IB=50 IC/IB=20 IC/IB=10 VCE(SAT) (V) IC Collector Current (A) VBE(SAT) v IC IC/IB=100 100°C 25°C -55°C VCE(SAT) (V) IC Collector Current (A) hFE v IC VCE=2V -55°C 25°C 100°C Normalised Gain IC Collector Current (A) 25°C VCE(SAT) v IC IC/IB=100 100°C -55°C VBE(SAT) (V) IC Collector Current (A) VBE(ON) v IC VCE=2V 100°C 25°C -55°C VBE(ON) (V) IC Collector Current (A) Typical Gain (hFE)
Document number: DS33644 Rev. 5 - 2 6 of 7 www.diodes.com November 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXT1053AK Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. TO252 Dim Min Max Typ A 2.19 2.39 2.29 A1 0.00 0.13 0.08 A2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c2 0.45 0.58 0.531 D 6.00 6.20 6.10 D1 5.21 e 2.286 E 6.45 6.70 6.58 E1 4.32 H 9.40 10.41 9.91 L 1.40 1.78 1.59 L3 0.88 1.27 1.08 L4 0.64 1.02 0.83 a 0° 10° All Dimensions in mm Dimensions Value (in mm) Z 11.6 X1 1.5 X2 7.0 Y1 2.5 Y2 7.0 C 6.9 E1 2.3 E 2X b2 D A e L 3X b a H A2 E1 C Z
Document number: DS33644 Rev. 5 - 2 7 of 7 www.diodes.com November 2013 © Diodes Incorporated A Product Line of Diodes Incorporated ZXT1053AK IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. Diodes Incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does Di odes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Inco rporated products for any unintended or una uthorized application, Customers shall i ndemnify and hold Diodes Incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of t his document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporate d and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com