ZXMS6004FF

Document overview

  • Manufacturer or author: Diodes Incorporated
  • PDF pages: 9

Technical content

Document number: DS44696 Rev. 3 - 2 1 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF 60V N-CHANNEL SELF-PROTECTED ENHANCEMENT MODE IntelliIFET® MOSFET Product Summary

  • Continuous Drain-Source Voltage: 60V
  • On-State Resistance: 500mΩ
  • Nominal Load Current (VIN = 5V): 1.3A
  • Clamping Energy: 90mJ

Description

The ZXMS6004FF is a self-protected low-side IntelliFET MOSFET with logic-level input. It integrates overtemperature, overcurrent, overvoltage (active clamp) and ESD protected logic-level functionality. The ZXMS6004FF is ideal as a general -purpose switch driven from 3.3V or 5V microcontrollers in harsh environments where standard MOSFETs are not rugged enough.

Applications

  • Especially suited for loads with a high inrush current such as lamps and motors
  • All types of resistive, inductive and capacitive loads in switching
  • μC compatible power switches for 12V and 24V DC applications
  • Automotive rated
  • Replaces electromechanical relays and discrete circuits
  • Linear mode capabilities – the current-limiting protection circuitry is designed to de-activate at low VDS to minimize on-state power dissipation. The maximum DC operating current is therefore determined by the thermal capability of the package/board combination, rather than by the protection circuitry. This does not compromise the product’s ability to self-protect at low VDS. Features and Benefits
  • Compact High Power Dissipation Package
  • Low Input Current
  • Logic-Level Input (3.3V and 5V)
  • Short-Circuit Protection with Auto Restart
  • Overvoltage Protection (Active Clamp)
  • Thermal Shutdown with Auto Restart
  • Overcurrent Protection
  • Input Protection (ESD)
  • High Continuous Current Rating
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
  • Halogen and Antimony Free. “Green” Device (Note 3)
  • This part is qualified to JEDEC standards (as references in AEC-Q) for High Reliability. https://www.diodes.com/quality/product-definitions/
  • An automotive-compliant part is available under a separate datasheet (ZXMS6004FFQ). Mechanical Data
  • Package: SOT23F
  • Package Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020
  • Terminals: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208
  • Weight: 0.012 grams (Approximate) Ordering Information (Note 4) Orderable Part Number Package Marking Reel Size (inches) Tape Width (mm) Packing Qty. Carrier ZXMS6004FFTA SOT23F 1K6 7 8 3,000 Reel ZXMS6004FF-7 SOT23F 1K6 7 8 3,000 Reel Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen - and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes -packaging/. IntelliFET® is a registered trademark of Diodes Incorporated in the United States and other countries. Top View Top View Pinout SOT23F S IN D

Document number: DS44696 Rev. 3 - 2 2 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Marking Information Functional Block Diagram 1K6 = Product Type Marking Code Y or Y: Year: 0 to 9 (ex: 6 = 2026) W or W: Week: A to Z: Week 1 to 26 a to z: Week 27 to 52 z: Represents Week 52 & 53 1K6 YW Overvoltage Protection dv/dt Overtemperature Protection Overcurrent Protection

Document number: DS44696 Rev. 3 - 2 3 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Value Unit Continuous Drain-Source Voltage VDS 60 V Drain-Source Voltage for Short-Circuit Protection VDS(SC) 36 V Continuous Input Voltage VIN -0.5 to +6 V Continuous Input Current @-0.2V ≤ VIN ≤ 6V Continuous Input Current @VIN < -0.2V or VIN > 6V IIN No Limit │IIN │≤ 2 mA Pulsed Drain Current @VIN = 3.3V IDM 2 A Pulsed Drain Current @VIN = 5V IDM 2.5 A Continuous Source Current (Body Diode) IS 1 A Pulsed Source Current (Body Diode) ISM 5 A Unclamped Single Pulse Inductive Energy TJ = 25°C, ID = 0.5A, VDD = 24V EAS 90 mJ Electrostatic Discharge (Human Body Model) VESD 4,000 V Charged Device Model VCDM 1,000 V Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Value Unit Power Dissipation @TA = 25°C (Note 5) Linear Derating Factor PD 0.83 6.66 W mW/°C Power Dissipation @TA = 25°C (Note 6) Linear Derating Factor PD 1.5 12.0 W mW/°C Thermal Resistance, Junction to Ambient (Note 5) RθJA 150 C/W Thermal Resistance, Junction to Ambient (Note 6) RθJA 83 °C/W Thermal Resistance, Junction to Case (Note 7) RθJC 44 °C/W Operating Temperature Range TJ -40 to 150 °C Storage Temperature Range TSTG -55 to 150 °C Recommended Operating Conditions The ZXMS6004FF is optimized for use with µC operating from 3.3V and 5V supplies. Characteristic Symbol Min Max Unit Input Voltage Range VIN 0 5.5 V Ambient Temperature Range TA -40 125 °C High-Level Input Voltage for MOSFET to be On VIH 3 5.5 V Low-Level Input Voltage for MOSFET to be Off VIL 0 0.7 V Peripheral Supply Voltage (Voltage to Which Load is Referred) VP 0 36 V Notes: 5. For a device surface-mounted on 15mm x 15mm single-sided, 1oz weight copper on 1.6mm FR4 board, in still air conditions. 6. For a device surface-mounted on 50mm x 50mm single-sided, 2oz weight copper on 1.6mm FR4 board, in still air conditions. 7. Thermal resistance from junction and the mounting surfaces of the drain pins.

Document number: DS44696 Rev. 3 - 2 4 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Typical Thermal Characteristics 1 10 10m 100m Limited by Over-Current Protection Single Pulse Tamb=25°C 15X15mm FR4 1oz Cu Limited by RDS(on) 1ms10ms 100ms 1sDC Safe Operating Area ID Drain Current (A) VDS Drain-Source Voltage (V) Limit of s/c protection 0 25 50 75 100 125 150 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 15X15mm FR4 1oz Cu Derating Curve Temperature (°C) Max Power Dissipation (W) 50X50mm FR4 2oz Cu 100µ 1m 10m 100m 1 10 100 1k 100 120 140 160 Tamb=25°C 15X15mm FR4 1oz Cu Transient Thermal Impedance D=0.5 D=0.2 D=0.1 Single Pulse D=0.05 Thermal Resistance (°C/W) Pulse Width (s) 100µ 1m 10m 100m 1 10 100 1k

100 Single Pulse

Tamb=25°C 15X15mm FR4 1oz Cu Pulse Power Dissipation Pulse Width (s) Maximum Power (W) Limited by Overcurrent Protection by RDS(ON)

Document number: DS44696 Rev. 3 - 2 5 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition Static Characteristics Drain-Source Clamp Voltage VDS(AZ) 60 65 70 V ID = 10mA Off-State Drain Current IDSS — — 500 nA VDS = 12V, VIN = 0V — — 1 µA VDS = 36V, VIN = 0V Input Threshold Voltage VIN(TH) 0.7 1 1.5 V VDS = VGS, ID = 1mA Input Current IIN — 60 100 μA VIN = +3V — 120 200 VIN = +5V Input Current while Overtemperature Active — — — 220 μA VIN = +5V Static Drain-Source On-State Resistance RDS(ON) — 400 600 mΩ VIN = +3V, ID = 0.5A — 350 500 VIN = +5V, ID = 0.5A Continuous Drain Current (Note 5) ID 0.9 — — A VIN = 3V, TA = 25°C 1.0 — — VIN = 5V, TA = 25°C Continuous Drain Current (Note 6) 1.2 — — VIN = 3V, TA = 25°C 1.3 — — VIN = 5V, TA = 25°C Current Limit (Note 8) ID(LIM) 0.7 1.7 — A VIN = +3V 1 2.2 — VIN = +5V Dynamic Characteristics Turn-On Delay Time tD(ON) — 5 — μs VDD = 12V, ID = 0.5A, VGS = 5V Rise Time tR — 10 — Turn-Off Delay Time tD(OFF) — 45 — Fall Time tF — 15 — Overtemperature Protection Thermal Overload Trip Temperature (Note 9) TJT 150 175 — °C — Thermal Hysteresis (Note 9) fF — 10 — °C — Notes: 5. For a device surface-mounted on 15mm x 15mm single-sided, 1oz weight copper on 1.6mm FR4 board, in still air conditions. 6. For a device surface-mounted on 50mm x 50mm single-sided, 2oz weight copper on 1.6mm FR4 board, in still air conditions. 7. Thermal resistance from junction and the mounting surfaces of the drain pins. 8. The drain current is restricted only when the device is in saturation (see graph ‘ Typical Output Characteristic’). This allows the device to be used in the fully on-state without interference from the current limit. The device is fully protected at all drain currents, as the low power diss ipation generated outside saturation makes current limit unnecessary. 9. Overtemperature protection is designed to prevent device from destruction under fault conditions. Fault conditions are considered as “outside” normal operating range, so this part is not designed to withstand overtemperature for extended periods .

Document number: DS44696 Rev. 3 - 2 6 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Typical Performance Characteristics 0 1 2 3 4 5 6 7 8 9 10 11 12 -75 -50 -25 0 25 50 75 100 125 150 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1 2 3 4 5 100 120 0.01 0.1 Typical Output Characteristic TA = 25°C VIN 5.5V 5.0V 4.5V 4.0V 3.5V 3.0V 2.5V 2.0V ID Drain Current (A) VDS Drain-Source Voltage (V) Threshold Voltage vs Temperature VIN = VDS ID = 1mA VTH Threshold Voltage (V) TJ Junction Temperature (°C) TJ = 150°C On-Resistance vs Input Voltage TJ = 25°C RDS(on) On-Resistance () VIN Input Voltage (V) ID = 0.5A Reverse Diode Characteristic VIN = 3V VIN = 5V On-Resistance vs Temperature TJ Junction Temperature (°C) RDS(on) On-Resistance () Input Current vs Input Voltage IIN Input Current (A) VIN Input Voltage (V) VSD Source-Drain Voltage (V) IS Source Curent (A) TJ=25°C TJ=150°C RDS(ON) RDS(ON)

Document number: DS44696 Rev. 3 - 2 7 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Typical Performance Characteristics (continued) -50 0 50 100 150 200 250 300 -50 0 50 100 150 200 250 300 0 5 10 15 20 0.0 0.5 1.0 1.5 2.0 2.5 Switching Speed VIN Drain-Source Voltage (V) Time (s) VDS ID=500mA VDS VIN Switching Speed Drain-Source Voltage (V) Time (s) ID=500mA Typical Short Circuit Protection VIN = 5V VDS = 15V RD = 0 ID Drain Current (A) Time (ms) (µs) (µs) Typical Short-Circuit Protection

Document number: DS44696 Rev. 3 - 2 8 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SOT23F SOT23F Dim Min Max Typ A 0.80 1.00 0.90 A1 0.00 0.10 0.01 b 0.35 0.50 0.44 c 0.10 0.20 0.16 D 2.80 3.00 2.90 e 0.95 REF e1 1.90 REF E 2.30 2.50 2.40 E1 1.50 1.70 1.65 k 1.20 - - L 0.30 0.65 0.50 L1 0.30 0.50 0.40 R 0.05 0.15 - All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT23F Dimensions Value (in mm) C 0.95 X 0.80 Y 1.110 Y1 3.000 D b E A R b e c k L X Y C

Document number: DS44696 Rev. 3 - 2 9 of 9 www.diodes.com July 2026 © 2026 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6004FF IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICUL AR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes ’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incor porate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional - safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality co ntrol techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trad emarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sa le is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any da mages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Di odes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this docu ment is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to ma ke modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and- conditions/important-notice The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2026 Diodes Incorporated. All Rights Reserved. www.diodes.com