ZXMS6003G_V01 DIODES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE INTELLIFET MOSFET WITH PROGRAMMABLE CURRENT LIMIT Product Summary

  • Continuous Drain Source Voltage VDS = 60V
  • On-State Resistance: 500mΩ
  • Nominal Load Current (VIN = 5V): 1.4A
  • Clamping Energy: 550mJ

Description

The ZXMS6003G is a s elf-protected low-side IntelliFETTM MOSFET. It features m onolithic overtemperature, overcurrent, overvoltage (active clamp), and ESD protected logic level functionality. It is intended as a general purpose switch with status indication and programmable current limit.

Applications

  • Especially Suited for Loads with a High In-Rush Current Such as Lamps and Motors
  • All Types of Resistive, Inductive, and Capacitive Loads in Switching Applications
  • μC Compatible Power Switch for 12V and 24V DC Applications
  • Replaces Electromechanical Relays and Discrete Circuits
  • Linear Mode Capability - The current-limiting protection circuitry is designed to deactivate at low VDS in order not to compromise the load current during normal operation. The design max. DC operating current is therefore determined by the thermal capability of the package/board combination rather than by the protection circuitry. Note: This does not compromise the product's ability to self - protect during short-circuit load conditions.
  • Current Limit is Programmable via an External Resistor R PROG Connected Between Status and IN pins
  • Status Pin Voltage Reflects the Gate Drive Applied Internally to the Power MOSFET
  • With VIN = 5V and RPROG = 24kΩ:  Status Voltage: 5V Indicates Normal Operation  Status Voltage: 2V to 3V Indicates the Device is in Current - Limiting Mode  Status Voltage < 1V Indicates the Device is in Thermal Shutdown Features and Benefits
  • Current Limit Programmable via External Resistor
  • Status Pin (Analog Status Indication)
  • Logic Level Input
  • Short-Circuit Protection with Auto Restart
  • Overvoltage Protection (Active Clamp)
  • Thermal Shutdown with Auto Restart
  • Overcurrent Protection
  • Input Protection (ESD)
  • Load Dump Protection (Actively Protects Load)
  • High Continuous Current Rating
  • Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
  • Halogen and Antimony Free. “Green” Device (Note 3) Mechanical Data
  • Case: SOT223 (Type DN)
  • Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020
  • Terminals: Matte Tin Finish
  • Weight: 0.112 grams (Approximate) Note: RPROG must be connected between the Status and IN pins. Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Top View SOT223 (Type DN) Green IntelliFET is a trademark of Diodes Incorporated. ZXMS6003G Document number: DS33607 Rev. 5 - 2 1 of 9 www.diodes.com July 2019 © Diodes Incorporated

Ordering Information (Note 4) Part Number Marking Reel Size (inches) Tape Width (mm) Quantity per Reel ZXMS6003GTA ZXMS6003 7 12 1000 Units Note: 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes -packaging/. Marking Information Functional Block Diagram ZXMS6003 = Product Type Marking Code YWW = Date Code Marking Y or Y = Last Digit of Year (ex: 8 = 2018) WW or WW = Week Code (01 to 53) ZXMS6003G Document number: DS33607 Rev. 5 - 2 2 of 9 www.diodes.com July 2019 © Diodes Incorporated

Absolute Maximum Ratings (@TA = +25°C, unless otherwise stated.) Parameter Symbol Limit Unit Continuous Drain-Source Voltage VDS 60 V Drain-Source Voltage for Short-Circuit Protection VIN = 5V (Note 5) VDS(SC) 36 V Drain-Source Voltage for Short-Circuit Protection VIN = 10V (Note 5) VDS(SC) 20 V Continuous Input Voltage VIN -0.2 to +10 V Peak Input Voltage VIN -0.2 to +20 V Operating Temperature Range TJ -40 to +150 °C Storage Temperature Range TSTG -55 to +150 °C Power Dissipation at @TA = +25°C (Note 6) PD 2.5 W Continuous Drain Current @VIN = 10V; TA = +25°C (Note 6) ID 1.6 A Continuous Drain Current @VIN = 5V; TA = +25°C (Note 6) ID 1.4 A Continuous Source Current (Body Diode) (Note 6) IS 3 A Pulsed Source Current (Body Diode) (Note 7) IS 8 A Unclamped Single Pulse Inductive Energy EAS 550 mJ Load Dump Protection VLOADDUMP 80 V Electrostatic Discharge (Human Body Model) VESD 4000 V DIN Humidity Category, DIN 40 040 — E — IEC Climatic Category, DIN IEC 68-1 — 40/150/56 — Thermal Resistance (@TA = +25°C, unless otherwise stated.) Parameter Symbol Value Unit Junction to Ambient (Note 6) RϴJA 50 °C/W Junction to Ambient (Note 7) RϴJA 28 °C/W Notes: 5. For ID(LIM) < 1.2A (see safe operating area curve). 6. For a device surface mounted on 50mm × 50mm × 1.6mm FR-4 board with a high coverage of single sided 2oz weight copper. 7. For a device surface mounted on FR-4 board and measured at t < = 10s. ZXMS6003G Document number: DS33607 Rev. 5 - 2 3 of 9 www.diodes.com July 2019 © Diodes Incorporated

Document number: DS33607 Rev. 5 - 2 4 of 9 www.diodes.com July 2019 © Diodes Incorporated

Electrical Characteristics (@TA = +25°C, unless otherwise stated.) Parameter Symbol Min Typ Max Unit Conditions Static Characteristics Drain-Source Clamp Voltage VDS(AZ) 60 70 75 V ID = 10mA Off State Drain Current IDSS — 0.1 3 µA VDS = 12V, VIN = 0V Off State Drain Current IDSS — 3 15 µA VDS = 32V, VIN = 0V Input Threshold Voltage (Note 8) VIN(TH) 1 2.1 — V VDS = VGS, ID = 1mA Input Current IIN — 0.7 1.2 mA VIN = 5V Input Current IIN — 1.5 2.7 mA VIN = 7V Input Current IIN — 4 7 mA VIN = 10V Static Drain-Source On-State Resistance RDS(ON) — 520 675 mΩ VIN = 5V, ID = 0.2A Static Drain-Source On-State Resistance RDS(ON) — 385 500 mΩ VIN = 10V, ID = 0.5A Current Limit (Note 9) ID(LIM) 0.2 0.3 0.4 A VIN = 5V, VDS = 10V, RPROG = 20k Current Limit (Note 9) ID(LIM) 0.7 0.9 1.2 A VIN = 10V, VDS = 10V, RPROG = 20k Dynamic Characteristics Turn-On Time (VIN to 90% ID) tON — 3 — µs RPROG = 20k, RL = 22Ω, VIN = 0 to 10V, VDD = 12V Turn-Off Time (VIN to 90% ID) tOFF — 13 — µs RPROG = 20k, RL = 22Ω, VIN = 10V to 0V, VDD = 12V Slew Rate On (70 to 50% VDD) dVDS/dtON — 8 — V/µs RPROG= 20k, RL = 22Ω, VIN = 0 to 10V, VDD = 12V Slew Rate Off (50 to 70% VDD) dVDS/dtON — 3.2 — V/µs RPROG = 20k, RL = 22Ω, VIN = 10V to 0V, VDD = 12V Protection Functions (Note 10) Required Input Voltage for Over- Temperature Protection VPROT 4.5 — — V — Thermal Overload Trip Temperature TJT +150 +175 — °C — Thermal Hysteresis — — +1 — °C — Unclamped Single Pulse Inductive Energy TJ = +25°C EAS 550 — — mJ ID(ISO) = 0.7A, VDD = 32V Unclamped Single Pulse Inductive Energy TJ = +150°C EAS 200 — — mJ ID(ISO) = 0.7A, VDD = 32V Status Flag Normal Operation VSTATUS — 4.95 — V VIN = 5V Current Limit Operating VSTATUS — 2.5 — V VIN = 5V Thermal Shutdown Activated VSTATUS — 0.2 1 V VIN = 5V Normal Operation VSTATUS — 8 — V VIN = 10V Current Limit Operation VSTATUS — 3 — V VIN = 10V Thermal Shutdown Activated VSTATUS — 0.35 1 V VIN = 10V Inverse Diode Source Drain Voltage VSD — — 1 V VIN = 0V, -ID = 1.4A Notes: 8. Protection features may operate outside spec for V IN < 4.5V. 9. The drain current is limited to a reduced value when V DS exceeds a safe level. 10. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the datasheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not designed for continuous, repetitive operation. ZXMS6003G Document number: DS33607 Rev. 5 - 2 5 of 9 www.diodes.com July 2019 © Diodes Incorporated

Document number: DS33607 Rev. 5 - 2 6 of 9 www.diodes.com July 2019 © Diodes Incorporated

Typical Characteristics (cont.) ZXMS6003G Document number: DS33607 Rev. 5 - 2 7 of 9 www.diodes.com July 2019 © Diodes Incorporated

Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SOT223 (Type DN) Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT223 (Type DN) A1A D b e C E L 0.25 Seating Plane Gauge Plane SOT223 (Type DN) Dim Min Max Typ A -- 1.70 -- A1 0.01 0.15 -- A2 1.50 1.68 1.60 b 0.60 0.80 0.70 b2 2.90 3.10 -- c 0.20 0.32 -- D 6.30 6.70 -- E 6.70 7.30 -- E1 3.30 3.70 -- e -- -- 2.30 e1 -- -- 4.60 L 0.85 -- -- All Dimensions in mm Dimensions Value (in mm) C 2.30 C1 6.40 X 1.20 X1 3.30 Y 1.60 Y1 1.60 Y2 8.00 Y X C C1 Y2 ZXMS6003G Document number: DS33607 Rev. 5 - 2 8 of 9 www.diodes.com July 2019 © Diodes Incorporated

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the ex press written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety -critical, life support devices or systems, notwithstanding any devices - or systems -related information or support that may be provided by Diodes Incor porated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2019, Diodes Incorporated www.diodes.com ZXMS6003G Document number: DS33607 Rev. 5 - 2 9 of 9 www.diodes.com July 2019 © Diodes Incorporated