ZXMS6002G
Document overview
- Manufacturer or author: Diodes Incorporated
- PDF pages: 10
Technical content
Document number: DS33606 Rev. 7 - 4 1 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE IntelliFET MOSFET WITH STATUS INDICATION Product Summary Continuous Drain Source Voltage VDS = 60V On-State Resistance: 500mΩ Nominal Load Current (VIN = 5V): 1.4A Clamping Energy: 550mJ
Description
The ZXMS6002G is a self-protected low-side IntelliFET® MOSFET. It features monolithic overtemperature, overcurrent, overvoltage (active clamp) and ESD-protected logic level functionality. It is intended as a general purpose switch, with status indication and programmable current limit.
Applications
Especially Suited for Loads with a High In-Rush Current Such as Lamps and Motors All types of resistive, inductive and capacitive loads in switching μC Compatible Power Switch for 12V and 24V DC Applications Replaces electromechanical relays and discrete circuits Linear mode capability - the current-limiting protection circuitry is designed to de -activate at low VDS, in order not to compromise the load current during normal operation. The design max. DC operating current is therefore determined by the thermal capability of the package/board combination, rather than by the protection circuitry. Note: This does not compromise the product's ability to self - protect during short-circuit load conditions. Status pin voltage reflects the gate drive being applied internally to the power MOSFET With VIN = 5V: Status Voltage: 5V indicates normal operation Status Voltage: 2V to 3V indicates that the device is in current-limiting mode Status Voltage: <1V indicates that the device is in thermal shutdown Features and Benefits Status Pin (Analog Status Indication) Logic Level Input Short Circuit Protection with Auto Restart Overvoltage Protection (Active Clamp) Thermal Shutdown with Auto Restart Overcurrent Protection Input Protection (ESD) Load Dump Protection (Actively Protects Load) High Continuous Current Rating Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ Mechanical Data Package: SOT223 Package Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish Weight: 0.112 grams (Approximate) Ordering Information (Note 4) Part Number Package Marking Code Reel Size (inches) Tape Width (mm) Packing Qty. Carrier ZXMS6002GTA SOT223 (Type DN) ZXMS6002 7 12 1,000 Units Reel Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen - and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes -packaging/. Marking Information Top View SOT223 (Type DN) Top View Pin Out ZXMS6002 = Product Type Marking Code YWW = Date Code Marking Y or Y = Last Digit of Year (ex: 3 = 2023) WW or WW = Week Code (01 to 53) THE ZXMS6002G IS OBSOLETE. PLEASE CONTACT US. Green
Document number: DS33606 Rev. 7 - 4 2 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Functional Block Diagram
Document number: DS33606 Rev. 7 - 4 3 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Absolute Maximum Ratings (@TA = +25° C, unless otherwise stated.) Parameter Symbol Limit Unit Continuous Drain-Source Voltage VDS 60 V Drain-Source Voltage for Short Circuit Protection VIN = 5V VDS(SC) 36 V Drain-Source Voltage for Short Circuit Protection VIN = 10V VDS(SC) 20 V Continuous Input Voltage VIN -0.2 to +10 V Peak Input Voltage VIN -0.2 to +20 V Operating Temperature Range TJ -40 to +150 °C Storage Temperature Range TSTG -55 to +150 °C Power Dissipation at TA = +25°C (Note 5) PD 2.5 W Continuous Drain Current @ VIN = 10V; TA = +25°C (Note 5) ID 1.6 A Continuous Drain Current @ VIN = 5V; TA = +25°C (Note 5) ID 1.4 A Continuous Source Current (Body Diode) (Note 5) IS 3 A Pulsed Source Current (Body Diode) (Note 6) IS 4.7 A Unclamped Single Pulse Inductive Energy EAS 550 mJ Load Dump Protection VLOADDUMP 80 V Electrostatic Discharge (Human Body Model) VESD 4,000 V DIN Humidity Category, DIN 40 040 — E — IEC Climatic Category, DIN IEC 68-1 — 40/150/56 — Thermal Resistance (@TA = +25° C, unless otherwise stated.) Parameter Symbol Value Unit Junction to Ambient (Note 5) RθJA 50 °C/W Junction to Ambient (Note 6) RθJA 28 °C/W Notes: 5. For a device surface mounted on 50mm 50mm 1.6mm FR-4 board with a high coverage of single sided 2oz weight copper. 6. For a device surface mounted on FR-4 board and measured at t ≤ 10s.
Document number: DS33606 Rev. 7 - 4 4 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Thermal Characteristics See Note 5 TA=25°C TA=25°C TA=25°C RDS(ON) Limited
Document number: DS33606 Rev. 7 - 4 5 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Electrical Characteristics (@TA = +25° C, unless otherwise stated.) Parameter Symbol Min Typ Max Unit Conditions Static Characteristics Drain-Source Clamp Voltage VDS(AZ) 60 70 75 V ID = 10mA Off State Drain Current IDSS — 0.1 3 μA VDS = 12V, VIN = 0V Off State Drain Current IDSS — 3 15 μA VDS = 32V, VIN = 0V Input Threshold Voltage (Note 7) VIN(TH) 1 2.1 — V VDS = VGS, ID = 1mA Input Current IIN — 0.7 1.2 mA VIN = 5V Input Current IIN — 1.5 2.7 mA VIN = 7V Input Current IIN — 4 7 mA VIN = 10V Static Drain-Source On-State Resistance RDS(ON) — 520 675 mΩ VIN = 5V, ID = 0.7A Static Drain-Source On-State Resistance RDS(ON) — 385 500 mΩ VIN = 10V, ID = 0.7A Current Limit (Note 8) ID(LIM) 0.7 1.0 1.5 A VIN = 5V, VDS > 5V Current Limit (Note 8) ID(LIM) 1 1.8 2.3 A VIN = 10V, VDS > 5V Dynamic Characteristics Turn-On Time (VIN to 90% ID) tON — 3 — μs RL = 22Ω, VIN = 0 to 10V, VDD = 12V Turn-Off Time (VIN to 90% ID) tOFF — 13 — μs RL = 22Ω, VIN = 10V to 0V, VDD = 12V Slew Rate On (70 to 50% VDD) dVDS/dtON — 8 — V/μs RL = 22Ω, VIN = 0 to 10V, VDD = 12V Slew Rate Off (50 to 70% VDD) dVDS/dtON — 3.2 — V/μs RL = 22Ω, VIN = 10V to 0V, VDD = 12V Notes: 7. Protection features may operate outside spec for VIN < 4.5V. 8. The drain current is limited to a reduced value when V DS exceeds a safe level.
Document number: DS33606 Rev. 7 - 4 6 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Electrical Characteristics (continued) (@TA = +25° C, unless otherwise specified.) Parameter Symbol Min Typ Max Unit Conditions Protection Functions (Note 9) Required Input Voltage for Overtemperature Protection VPROT 4.5 — — V — Thermal Overload Trip Temperature TJT +150 +175 — °C — Thermal Hysteresis — — +1 — °C — Unclamped Single Pulse Inductive Energy TJ = +25°C EAS 550 — — mJ ID(ISO) = 0.7A, VDD = 32V Unclamped Single Pulse Inductive Energy TJ = +150°C EAS 200 — — mJ ID(ISO) = 0.7A, VDD = 32V Status Flag Normal Operation VSTATUS — 4.95 — V VIN = 5V Current Limit Operating VSTATUS — 2.5 — V VIN = 5V Thermal Shutdown Activated VSTATUS — 0.2 1 V VIN = 5V Normal Operation VSTATUS — 8 — V VIN = 10V Current Limit Operation VSTATUS — 3 — V VIN = 10V Thermal Shutdown Activated VSTATUS — 0.35 1 V VIN = 10V Inverse Diode Source Drain Voltage VSD — — 1 V VIN = 0V, -ID = 1.4A Note: 9. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the datasheet. Fault conditions are considered as "outside" normal operating range. Protection functions are not designed for continuous, repetitive operation.
Document number: DS33606 Rev. 7 - 4 7 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Typical Characteristics TJ=25°C Current Limit Inactive Current Limit Active VIN = 5V ID = 0.7A VIN = 10V ID = 0.7A TJ = 25°C ID = 0.7A VIN = VDS ID = 1mA TJ = 150°C TJ = 25°C VIN VDS RD = 22Ω RIN = 25Ω VIN Normalised VIN(TH)
Document number: DS33606 Rev. 7 - 4 8 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Typical Characteristics (continued) TJ=25°C VIN (V) VSTATUS vs VIN Current Limiting and Over Temp Shutdown Status Indication at VIN = 5V Current Limiting and Over Temp Shutdown Status Indication at VIN = 10V Typical VSTATUS (V) Typical VSTATUS (V) Typical VSTATUS (V)
Document number: DS33606 Rev. 7 - 4 9 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SOT223 (Type DN) Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT223 (Type DN) A1A D b e C E L 0.25 Seating Plane Gauge Plane SOT223 (Type DN) Dim Min Max Typ A -- 1.70 -- A1 0.01 0.15 -- A2 1.50 1.68 1.60 b 0.60 0.80 0.70 b2 2.90 3.10 -- c 0.20 0.32 -- D 6.30 6.70 -- E 6.70 7.30 -- E1 3.30 3.70 -- e -- -- 2.30 e1 -- -- 4.60 L 0.85 -- -- All Dimensions in mm Dimensions Value (in mm) C 2.30 C1 6.40 X 1.20 X1 3.30 Y 1.60 Y1 1.60 Y2 8.00 Y X C C1 Y2
Document number: DS33606 Rev. 7 - 4 10 of 10 www.diodes.com October 2023 © 2023 Copyright Diodes Incorporated. All Rights Reserved. ZXMS6002G OBSOLETE – PART DISCONTINUED IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICUL AR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engin eering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality con trol techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associ ated with their applications. 3. Diodes assumes no liability for any application -related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein wi ll assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against al l damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or fore ign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ p roducts are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in r espect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sa le is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contraven tion of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any da mages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this docum ent is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further no tice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arisin g from any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and- conditions/important-notice The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2023 Diodes Incorporated. All Rights Reserved. www.diodes.com