ZXFBF05 ZETEX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

The ZXFBF05 is a low cost, high slew rate, quad buffer amplifier. Built using the Zetex CA700 technology, this buffer has a small signal bandwidth of greater than 100MHz and a 1 volt pk-pk bandwidth of greater than 20 MHz. Each channel draws only 7.5mA. The device operates from a ±5 volt supply, which makes it ideal in a majority of applications. This space saving buffer may be used in a wide variety of applications such as, video switching matrix, multi-channel instrumentation equipment, and A/D input buffer, etc. FEATURES AND BENEFITS

  • 4 Buffers per package
  • Low distortion Class A O/P
  • 100MHz bandwidth
  • Low cost
  • Designed for up to 300pF load
  • Low supply current (7.5mA per buffer)
  • No thermal runaway
  • 14 pin SOIC package

APPLICATIONS

  • Video Switching Matrix input buffer
  • Instrumentation
  • Multi-channel A/D input buffer
  • Multi-isolation buffer PART NUMBER PACKAGE PART MARK ZXFBF05N14 SOIC14N ZXFBF05

ORDERING INFORMATION

PART NUMBER CONTAINER INCREMENT ZXFBF05N14TA Reel 7” 500 ZXFBF05N14TC Reel 13” 2500

RELATED PRODUCTS

ZXFBF25 4 Channel Buffer with output enable

4 Channel Buffer Device with high capacitance load capability

14 PIN SOIC PACKAGE

Vin=370mV pk-pk, F=4M H z RL = 1kΩ Vout ABSOLUTE MAXIMUM RATINGS Voltage on any pin 20V (relative to V-) Operating temperature range 0 to 70°C (de-rated for -40 to 85°C) Storage Temperature -55 to 125°C

ELECTRICAL CHARACTERISTICS

Test Conditions: Temperature =25°C, V+ = 5.00, V- = -5.00V, RL = 1kΩ , CL = 10pF Parameter Conditions Min. Typical Max. Units Offset Voltage V in = 0V -25 - 25 mV Offset Voltage Drift V in = 0V 20 V/°C Supply Current All inputs = 0V 5.0 30 40 mA Input Bias Current V in = 0V 0.1 1.0 2.0 µA Output Voltage RL = 200 Ω ±1 V DC Gain Vin = ± 0.5V, R L =1 k Ω Voffset = 0.0V 0.95 0.98 1.00 V/V DC Gain Vin = ±0.5V, R L =1 k Ω Voffset = 0.25V 0.95 0.98 1.00 V/V Sink Current V in =0 V ,V out =0.5V 4.0 6.0 12.0 mA Source Current V in =0 V ,V out =-0.5V 8.0 15.0 18.0 mA Input Resistance 10 20 100 MΩ Output Resistance 5 10 15 Ω Bandwidth 20mVp-p, 1.0Vp-p 100 MHz Slew Rate 40 V/µs Voltage Noise 10 – 100 kHz 15 nV/ √Hz Differential Gain NTSC F = 3.58MHz, V in = 0.286Vp-p, DC ∆ Vin = 0 to 0.714V 0.1 % Differential Phase NTSC 0.1 5 Degrees Differential Gain PAL F = 4.43MHz, V in = 0.286Vp-p, DC ∆ Vin = 0 to 0.714V 0.1 % Differential Phase PAL

0.15 Degrees

Channel Isolation Vin = 370mVp-p, RL = 1k Ω F=4M H z -60 dB NOTES Test circuit for measuring channel isolation. Channel Isolation = 20 x LOG10 (Vout /V in)d B ZXFBF05

NC OUT 1,2,3,4 Buffer outputs. IN 1,2,3,4 Buffer Inputs. V+ Positive supply pin, +5 volts. V- Negative supply pin, -5 volts. PIN DESCRIPTION APPLICATION CIRCUIT DC Coupled Configuration

C RL 1/4 ZXFBF04 100nF 100nF RS VoutVin APPLICATION CIRCUIT AC Coupled Configuration NOTE. Rs: Source Resistor, provides DC bias for buffer input. Rs /H3335510kΩ Both 100nF decoupling capacitors should be situated close to device supply pins. TYPICAL CHARACTERISTICS 0.1 1 10 -100 -90 -80 -70 -60 -50 -40 - 5 0 - 2 5 0 2 55 07 5 1 0 00.986 0.987 0.988 0.989 0.990 0.991 Channel Isolation v Frequency Attenation (dB) Frequency (MHz) RL =1 kΩ V +=5 V DC Differential Gain v Temperature DC Gain (Vin/Vout) Temperature (°C) ZXFBF05

Test Conditions:V+=5V, Temperature=25°C.

Zetex plc. Fields New Road, Chadderton, Oldham, OL9-8NP, United Kingdom. Telephone: (44)161 622 4422 (Sales), (44)161 622 4444 (General Enquiries) Fax: (44)161 622 4420 Zetex GmbH Zetex Inc. Zetex (Asia) Ltd. These are supported by Streitfeldstraße 19 47 Mall Drive, Unit 4 3701-04 Metroplaza, Tower 1 agents and distributors in D-81673 München Commack NY 11725 Hing Fong Road, major countries world-wide Germany USA Kwai Fong, Hong Kong © Zetex plc 2001 Telefon: (49) 89 45 49 49 0 Telephone: (631) 543-7100 Telephone:(852) 26100 611 Fax: (49) 89 45 49 49 49 Fax: (631) 864-7630 Fax: (852) 24250 494 Internet:http://www.zetex.com This publication is issued to provide outline information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. The Company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. E Pin 1 O H c L h x 45° A D b e DIM Inches Millimetres Min Max Min Max A 0.053 0.069 1.35 1.75 A1 0.004 0.010 0.10 0.25 D 0.337 0.344 8.55 8.75 H 0.228 0.244 5.80 6.20 E 0.150 0.157 3.80 4.00 L 0.016 0.050 0.4 1.27 e 0.050 BSC 1.27 BSC b 0.013 0.020 0.33 0.51 c 0.008 0.010 0.19 0.25 O 0 °8 °0 °8 ° PACKAGING INFORMATION SOIC 14 Lead ISSUE 1 - FEBRUARY 2001 ZXFBF05