DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Z-Axis RFID Transponder Coils – ZXC Document 597-1 Document 597-1 Revised 03/24/10 Inductance2 Read Matching at 125 kHz distance3 Sensitivity4 capacitor 5 DCR max6 SRF typ7 Part number1 ±5% (mH) Q min2 (inches/cm) (mV/µT) (pF) (Ohms) (kHz) ZXC-255XJL_ 2.48 57 33 / 83.8 9.75 654 37 1975 ZXC-495XJL_ 4.90 64 33 / 83.8 18.0 331 43 1370 ZXC-715XJL_ 7.10 65 31 / 78.7 25.0 228 62 1220 ZXC-116XJL_ 11.4 60 31 / 78.7 50.0 142 110 990 ZXC-156XJL_ 14.8 55 31 / 78.7 77.0 110 160 815 1. When ordering, please specify packaging code: ZXC-725XJLC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2000 parts per full reel). 2. Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended test procedures, contact Coilcraft. 3. Read distance measured using the KEELOQ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the volt- age across the resonant circuit dropped below 10 mV. 4. Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.” 5. Matching capacitor value required for parallel resonant circuit operating at 125 kHz. 6. DCR measured on micro-ohmmeter. 7. SRF measured using Agilent/HP 8753D network analyzer. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ferrite Terminations RoHS matte tin over nickel over phos bronze. Other terminations available at additional cost. Weight 0.53 – 0.56 g Ambient temperature –40°C to +125°C Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +200 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 2.24 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf.
- Z-axis RFID coil can be used with any of our other RFID coils for a complete three-dimensional solution.
- Only 10 mm square and 2.2 mm tall
- Four mounting pads for exceptional board adhesion
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 597-2 Document 597-2 Revised 03/24/10 RFID Transponder Coils – ZXC Typical Q vs FrequencyTypical L vs Frequency 0.01 0.1 101 Inductance (mH) Frequency (MHz) 7.10 mH 14.8 mH 2.48 mH 125 kHz 100 120 0.001 0.01 10.1 Q factor Frequency (MHz) 7.10 mH 14.8 mH 2.48 mH 0.398 10,1 0.398 10,1 0.192 4,88 0.045 1,14 0.213 5,4 0.065 1,65 0.410 10,41 max max max0.087 2,2 Recommended Land Pattern See note Note: These p Do not connect these pads to circuit or ground. ads are only for board adhesion. 123 Dimensions are in inches mm