ZX62WRD-B-5PC

ZX_18 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

12017.12ᶆ Micro-USB connectors meeting USB 2.0 Standard ZX Series ■Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination styles, allowing their use in various applications. ■Features 1. Size reduction Compared with the standard Mini-USB connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0. 2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations. 3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-A and Micro-B, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications. 4. Smooth mating and unmating A smooth mating and unmating operation results in less wear and a longer product life. The unique Hirose active latch mechanism produces a reliable and durable connector. Even after repeated use, the user will experience a smooth click sensation when mating the connectors. Note : The statement above only applies when using both plug and receptacles made by Hirose Electric. 5. Hirose was the first company to obtain a Micro-USB certification (TID number). Note : Contact us to ascertain whether a TID number has been acquired for an individual product. Reverse (Top mount)Drop-in (Mid-mount) Standard (Bottom mount) USB 2.0 Hi-Speed (480 Mbps) Eye diagram measurement results : Measured with 2.4 m long USB 2.0 cable 500ps/div 200 mV/div TP2 Fig.1 Fig.2 Fig.3 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard ■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ZX 62 RD - B - 5 P * 8 q q q w w w e r r r tyu o o tyu i ZX 40 - B - 5 S * - UNIT ZX 40 - B - SLDA

• Receptacles
• Plugs ■Product Specifications Ratings Current rating 1A (per contact) or 1.8A (contacts No. 1 and 5) and 0.5A (contacts No. 2, 3, and 4) Voltage rating 30V AC Operating temperature range -30°C to +85°C (Note1) Storage temperature range -30°C to +60°C Item Specification Conditions 1. Contact resistance 30mø max. 100mA 2. Withstanding voltage No flashover or insulation breakdown 100V AC / 1 minute 3. Capacitance 2pF max. Between adjacent contacts at 1,000Hz (AC voltage) 4. Durability Contact resistance : Rise from initial value of 10mø max.10,000 cycles 5. Total insertion/removal force Insertion force : 35N max., Removal force : 8N min. Mated with corresponding connector Note1 : Includes temperature rise caused by current flow. Note2 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Materials / Finish
• Receptacles Part Material Finish Remarks Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0
• Plugs Part Material Finish Remarks Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0 qSeries name ZX wTermination style 10's : Right-angle PCB wire, SMT 20's : Straight, PCB wire 40's : Direct wire 60's : Right-angle, PCB wire 80's : Cradle SMT eBoard mounting style Blank (Receptacles) D R RD M Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) rMating side configuration A B AB Micro-A Micro-B Micro-AB tNumber of contacts 5 yContact type P S Receptacle- Male Plug – Female uSerial No. iShell termination style – Blank Receptacles 8 SMT Through hole (solder tab length: 0.8mm) oComponents-plugs UNIT Assembly (Insulator/contact/lock) Cover (Note 1) Note 1 : Classifiers such as A, B, and C are entered for *. Micro-A Micro-B Micro-AB Interface Receptacle Plug

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard ■Configurations Mating side configuration Type Part No. 3D Image Page Receptacles Micro-B Standard SMT ZX62-B-5PA(33) SMT DIP ZX62D-B-5PA8(30) Reverse SMT ZX62R-B-5P(30) Drop-in SMT ZX62M-B-5P(30) Micro-AB Standard SMT ZX62-AB-5PA(31) SMT DIP ZX62D-AB-5P8(30) Reverse SMT ZX62R-AB-5P(30) SMT DIP ZX62RD-AB-5P8(30) Plugs Micro-B Direct wire soldering Assembly (insulator/contacts/lock) : ZX40-B-5S-UNIT(31) Cover-top : ZX40-B-SLDA Cover-bottom : ZX40-SLDB 9 and 10 PCB wire soldering (straight, through hole) Assembly (insulator/contacts/lock) : ZX20-B-5S-UNIT(30) Cover : ZX20-B-SLDC PCB wire soldering (SMT) Assembly (insulator/contacts/lock) : ZX64-B-5S-UNIT(31) Cover-top : ZX64-B-SLDA Cover- bottom : ZX64-SLDB 12 and 13 PCB wire soldering (SMT) Assembly (insulator/contacts/lock) : ZX64-B-5S-UNIT(31) Cover : ZX64-B-SLDC 12 and 13 Micro-A Direct wire soldering Assembly (insulator/contacts/lock) : ZX40-A-5S-UNIT(30) Cover-top : ZX40-A-SLDA Cover- bottom : ZX40-SLDB 14 and 15 Cradles Micro-B SMT DIP ZX80-B-5S(30) With lock ZX80-B-5SA(30) Without lock Note : 1 Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note : 2 Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note : 3 The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard ■Receptacles

• Micro B - Standard (Bottom mount), Shell SMT No.57.9 2.15 7.5 2.5 0.6 5 2.8 No.1 PCB EDGE NO CONDUCTIVE TRACES 0.5 4.3 6.2 9.8 1.6 No.5 1.45 3.35 1.9 1.35 0.4 1.3 2.6 4.1 8.3 No.1 BRecommended PCB mounting pattern
• Micro B - Standard (Bottom mount), Shell through hole All dimensions : mm 4.85 2.6 0.65 1.25(LAND) 2.9 0.85(TH) 0.2 NO CONDUCTIVE TRACES R0.325(TH) R0.325(TH) 0.5 1.3 1.9 2.75 3.35 1.5(TH)4.1 5.2 7.2 9.4 PCB EDGE 0.5(TH) R0.3(TH) 0.1 R0.525(LAND) 1.05(LAND) 0.4 0.65(TH) 1.35 No.5 R0.5(LAND) No.1 No.1 No.5 7.2 2.50.8 7.5 4.85 0.6 5 2.15 2.9 BRecommended PCB mounting pattern All dimensions : mm Part No. HRS No. Packaging ZX62-B-5PA(33) 242-0033-8 33 3,500pcs/reel Part No. HRS No. Packaging ZX62D-B-5PA8(30) 242-0056-3 30 2,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard PCB EDGE No.1 No.5 0.4 R0.4 3.6 2.4 4.3 6.9 2.6 1.3 7.8 8.8 1.9 7.15 5.15 2.4 1.4 1.05 1.5 4.7 C0.3 No.5No.1 4.8 4.7 0.25 1.3 2.6 7.5 11.5 7.5 0.6 1.25 1.23 2.74 4.3 5.3 1.9 BRecommended PCB mounting pattern No.5 NO CONDUCTIVE TRACES1.35 1.3 4.1 8.3 1.9 2.9 0.43 3.35 No.1 1.45 2.6 0.4 5.6 9.8 3.9 6.6 0.5 No.5 No.1 7.5 8.8 2.5 2.15 0.6 5 BRecommended PCB mounting pattern ■Receptacles

• Micro B - Reverse (Top mount) Shell SMT
• Micro B - Drop-in (Mid-mount), Shell SMT All dimensions : mm All dimensions : mm Part No. HRS No. Packaging ZX62R-B-5P(30) 242-0028-8 30 2,000pcs/reel Part No. HRS No. Packaging ZX62M-B-5P(30) 242-0024-7 30 1,500pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard No.1 No.5 0.5 1.3 1.9 1.45 3.35 1.35 2.6 0.4 6.2 9.8 4.3 1.6 8.3 4.1 PCB EDGE 8.8 No.5No.1 7.5 2.5 2.8 2.15 50.6 NO CONDUCTIVE TRACES BRecommended PCB mounting pattern ■Receptacles

• Micro AB - Standard (Bottom mount), Shell SMT 0.6 8.35 7.5 2.5 No.5No.1 4.45 0.6 2.025 3.125 2.8 1.3 1.7 1.5 0.65(TH) 1.05(LAND) R0.45(LAND) R0.25(TH) 0.4 2.6 4.45 1.35 1.9 3.4752.625 4.1 5.2 (0.5) (0.325) 9.4 0.5 1.5(TH) R0.3(TH) R0.5(LAND) 7.35(TH) 9(TH) 1.3 0.85(TH) 1.25(LAND) 3.125 No.5No.1 PCB EDGE NO CONDUCTIVE TRACES BRecommended PCB mounting pattern
• Micro AB - Standard (Bottom mount), Shell through hole All dimensions : mm All dimensions : mm Part No. HRS No. Packaging ZX62-AB-5PA(31) 242-0045-7 31 3,500pcs/reel Part No. HRS No. Packaging ZX62D-AB-5P8(30) 242-0027-5 30 2,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard 2.9 4-R0.4 4.1 8.3 4.75 0.85 0.43 1.45 2.6 1.3 1.35 0.4 0.5 1.6 9.8 6.6 3.35 1.9 NO CONDUCTIVE TRACES No.5 No.1 PCB EDGE No.5 No.1 0.6 5 2.15 8.8 2.5 7.5 BRecommended PCB mounting pattern ■Receptacles

• Micro AB - Reverse (Top mount), Shell SMT All dimensions : mm 0.6 PCB EDGE NO CONDUCTIVE TRACES 9.4 No.5R0.25(TH) No.1 9(TH) 7.35(TH) 6.6 4.45 2.6 1.3 0.4 1.05(LAND) R0.2MAX R0.45(LAND) 0.65(TH) 1.35 1.5 1.7 3.475 R0.5(LAND)2.625 1.9 1.5(TH) 1.30.852.9 4.75 (0.5) (0.325)R0.3(TH) 3.125 0.555 1.25(LAND) 0.85(TH) 8.35 2.5 7.5 No.1No.5 4.45 50.6 2.025 3.125 BRecommended PCB mounting pattern
• Micro AB - Reverse (Top mount), Shell through hole All dimensions : mm Part No. HRS No. Packaging ZX62R-AB-5P(30) 242-0035-3 30 2,000pcs/reel Part No. HRS No. Packaging ZX62RD-AB-5P8(30) 242-0025-0 30 2,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard Plugs – assembled (not-terminated, without overmold) Components ZX40-SLDB ZX40-*-SLDA Cover-top ZX40-*-5S-UNIT Assembly (insulator/ contacts/lock) *No PCB required Cover-bottom Cover ZX20-*-SLDC Assembly (insulator/contacts/lock) * Vertical through hole PCB termination ZX20-*-5S-UNIT ZX20 - PCB wire soldering Cover-bottom ZX64-SLDB Cover-top Assembly (insulator/ contacts/lock) * Right angle through hole PCB termination ZX64-*-5S-UNIT ZX64-*-SLDA ZX64 - PCB wire soldering ZX40 - Direct wire soldering

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

• Micro B - Component, Cover-top - Direct wire soldering 22.6 1.8 6.85 ■Plugs
• Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering 14.1 7.9 No.1No.54.2 All dimensions : mm All dimensions : mm Part No. HRS No. Packaging ZX40-B-5S-UNIT(31) 242-0002-4 31 1 piece Contact HRS for Cable Termination Procedure Manual. Part No. HRS No. Packaging ZX40-B-SLDA 242-0003-7 4,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard ■Plugs

• Micro A, Micro B - Component, Cover-bottom - Direct wire soldering 16.2 16.2 ZX40-SLDB ZX40-SLDB (3.3) All dimensions : mm 22.6 6.85 8.6 4.75 1.8
• Assembled All dimensions : mm Part No. HRS No. Packaging Cable dia. ZX40-SLDB 242-0004-0 4,000pcs/reel Ø3.8 ZX40-SLDB(3.3) 242-0023-4 Ø3.3

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard All dimensions : mm ■Plugs

• Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct) All dimensions : mm 1.3 2.6 5-0.15 1.4 12.2 1.55 0.35 7.9 No.1No.53.975 4.2 1.3 2.6 8.2 1.2(Through hole) 0.6(Through hole) 1.55 10.25 5-Ø0.7(Through hole) 5-Ø1.1(Land) R0.3(Through hole) 1(Land) 1.6(Land) R0.5(Land) No.1 No.5 PCB mounting pattern *PCB required (not supplied) Max. thickness: 0.6mm
• Micro B - Component, Cover - through hole 4.4 8.4 2-0.2 8.2 2.6 1.3 12.2 1.55 1.8 0.35 0.6 1.4 6.85 5-0.15 Assembly (insulator/contacts/lock) Cover
• Assembled Part No. HRS No. Packaging ZX20-B-SLDC 242-0022-1 4,000pcs/reel Part No. HRS No. Packaging ZX20-B-5S-UNIT(30) 242-0012-8 30 4,000pcs/pks Contact HRS for Cable Termination Procedure Manual. 1.1 8.2 2-0.2 0.6 6.85 1.8 12.1

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard 16.1 1.3 2.6 5-0.15 3.7 7.9 No.1No.5 ■Plugs

• Micro B - Assembly (insulator/contacts/lock) - Right angle SMT All dimensions : mm No.1No.5 1.3 2.6 6.8 0.5 1.1 1.5 0.35 PCB mounting pattern *PCB required (not supplied) Max. thickness: 1.0mm
• Micro B - Component, Cover-top – Right angle SMT 24.7 6.85 1.8 All dimensions : mm Part No. HRS No. Packaging ZX64-B-SLDA 242-0013-0 4,000pcs/reel Part No. HRS No. Packaging ZX64-B-5S-UNIT(31) 242-0009-3 31 1 piece Contact HRS for Cable Termination Procedure Manual.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard 24.7 4.1 8.4 6.85 1.8 Assembly (insulator/contacts/lock) Cover-top Cover-bottom

• Assembled ■Plugs
• Micro B - Component, Cover-bottom - Right angle SMT 18.25 All dimensions : mm Part No. HRS No. Packaging ZX64-SLDB 242-0049-8 4,000pcs/reel 16.1 6.85 8.4 4.1 1.8 Assembly (insulator/contacts/lock) Cover-top Cover-bottom
• Assembled All dimensions : mm 6.85 1.8 16.1
• Micro B - Component, Shell/cover – Right angle SMT Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB. Part No. HRS No. Packaging ZX64-B-SLDC 242-0018-4 4,000pcs/reel

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard 22.6 1.8 6.85

• Micro A - Component, Cover-top - Direct wire soldering All dimensions : mm ■Plugs
• Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering 12.4 7.9 4.2 No.1No.5 Contacts Insulator body (color grey) All dimensions : mm Part No. HRS No. Packaging ZX40-A-SLDA 242-0011-5 4,000pcs/reel Part No. HRS No. Packaging ZX40-A-5S-UNIT(30) 242-0010-2 30 1 piece Contact HRS for Cable Termination Procedure Manual.

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard 4.75 22.6 6.85 8.6 1.8 Assembly (insulator/contacts/lock) Cover-top Cover-bottom

• Assembled ■Plugs
• Micro A, Micro B - Component, Cover-bottom - Direct wire soldering 16.2 16.2 ZX40-SLDB ZX40-SLDB(3.3) All dimensions : mm All dimensions : mm Part No. HRS No. Packaging Cable dia. ZX40-SLDB 242-0004-0 4,000pcs/reel Ø3.8 ZX40-SLDB(3.3) 242-0023-4 Ø3.3

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard 8-R0.25 Contact No.5Contact No.1 2-Ø2.2(Hole) 16.55 0.37 8-R0.55 3.15 1.3(Through hole) 1.9(Land) 1.1(Land) 0.5(Through hole) 1.86 1.3 2.6 6.65 1.6(Through hole) 0.5(Through hole)0.4 2.9 2.2 1.1(Land) 2.2(Land)

• Micro B, without lock 6.85 No.5 No.1 2-0.26.65 1.3 2.6 5-0.15 1.88 2.78 2.42 0.37 2.32 3.52 16.55 20.55 2.5 7.1 13 1.15 1.86 3.15 0.7 R1.6 8.55 BPCB mounting pattern ■Plug-Vertical, cradle mount, Shell through hole
• Micro B, with lock 6.85 No.1No.5 2-0.26.65 1.3 2.6 5-0.15 1.88 2.78 2.42 0.37 2.32 3.52 16.55 20.55 2.5 7.1 13 1.15 1.86 3.15 0.7 R1.6 8.55 All dimensions : mm All dimensions : mm Part No. HRS No. Packaging ZX80-B-5S(30) 242-0017-1 30 100pcs/pks Part No. HRS No. Packaging ZX80-B-5SA(30) 242-0019-7 30 100pcs/pks

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard BPrecautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function. BRecommended Temperature Profile - Receptacles

• Using lead-free solder paste (ç) 250 240ç 230çmin 180ç 150ç 200 150 100 60S 30S The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/ thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations. Note 1 : Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2 : The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. BPackaging Specifications C A B 1.75 4 0.5 Ø1.5 Unreeling direction
• Embossed carrier tape dimensions E Ø13 Ø380 D Unreeling direction Part No. A dimension B dimension ZX62-B-5PA(33) 24 11.5 ZX62-AB-5PA(31) 24 11.5 ZX62M-B-5P(30) 24 11.5 Other 16 7.5 Part No. D dimension E dimension ZX62-B-5PA(33) 30.4 24.4 ZX62-AB-5PA(31) 30.4 24.4 ZX62M-B-5P(30) 30.4 24.4 Other 22.4 16.4
• Reel Dimensions

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard MEMO :

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard MEMO :

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 12/2017. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE

300 Brickstone Square Suite 201,

Andover, MA 01810 Phone : +1-978-662-5255 USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ KOREA: HIROSE KOREA CO.,LTD. 143, Gongdan 1-daero, Siheung-si, Gyeonggi-do, 15084, Korea Phone : +82-31-496-7000 Fax : +82-31-496-7100 http://www.hirose.co.kr/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960

Voisins le Bretonneux, France Phone : +33-1-85764886 Fax : +33-1-85764823 http://www.hirose.com/eu/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 18, Enterprise Center Tower 2, 209# Gong He Road, Jing’an District, Shanghai, CHINA 200070 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7355 http://www.hirose.com/tw/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.552, Regus-Green Bo ulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +91-12-660-8018 Fax : +91-120-4804949 http://www.hirose.com/sg/ SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 03, Anson Road, #20-01, Springleaf Tower, Singapore 079909 Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose.com/sg/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Lepas Penang, 11950, Malaysia Phone : +604-648-5536 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ Powered by TCPDF (www.tcpdf.org)