ZX62-B-5PA

ZX62 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

2010.8 Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series IOverview Extremely small high reliability connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications. IFeatures 1. Size reduction Compared with the standard Mini-B connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0. 2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations 3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-B and Micro-A, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications. 4. High durability Unique contact and lock configuration assures high durability while maintaining easy insertion / disconnection. Fully mated condition (when mated with corresponding HRS connector) is confirmed by a definite tactile sensation Reverse (Top mount )Drop-in (Mid-mount) Standard (Bottom mount ) USB 2.0 Hi-Speed (480 Mbps) Eye pattern measurement results: Measured with USB 2.0 cable 2.4 m long 500ps/div 200 mV/div TP2 Note: Contact us to ascertain whether a TID number has been acquired for an individual product. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 1. Contact resistance 30 mø max. 100 mA 2. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 3. Capacitance 2 pF max. Between adjacent contacts at 1,000 Hz (AC voltage) 4. Durability Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles 5. Total insertion/removal force Insertion force: 35 N max., Removal force: 8 N min. Mated with corresponding connector Item ConditionsSpecification ISpecifications Ratings

1 A (per contact) or

1.8 A (contacts No. 1 and 5) and 0.5 A (contacts No. 2, 3, and 4) Current rating Voltage rating Operating temperature range Storage temperature range

30 V AC

-30°C to +85 °C (Note1) -30 °C to +85°C IMaterials GReceptacles GPlugs Note 1: Classifiers such as A, B, and C are entered for *. IOrdering information ZX 62 RD - B - 5 P 8 1 2 4 53 6 7 8 ZX 40 - B - 5 S - UNIT 1 2 ZX 40 - B - SLDA GReceptacles GPlugs IProduct Styles Table 4 5 6 7 9 4 91 2 Series name ZX Termination style 10's: Right-angle PCB wire, SMT 20's: Straight, PCB wire 40's: Direct wire 60's: Right-angle, PCB wire 80's: Cradle SMT Board mounting style Blank Standard (Bottom mount) (Receptacles) D Standard (Bottom mount) through hole R Reverse (Top mount) RD Reverse (Top mount) through hole M Drop-in (Mid-mount) Mating side configuration A Micro-A B Micro-B AB Micro-AB Number of contacts 5 Contact type P Receptacle- Male S Plug – Female Serial No. Shell termination style – Blank SMT Receptacles 8 Through hole (solder tab length: 0.8mm) Components-plugs UNIT Assembly (Insulator/contact/lock) SLD* Cover (Note 1) Micro-A Micro-B Micro-AB Interface Receptacle Plug Part Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0 Material Finish Remarks Part Insulator Synthetic resin Micro-A: White, Micro-B: Black UL94V-0 Material Finish Remarks Note1: Includes temperature rise caused by current flow. Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX62-B-5PA(11) PCB wire soldering (SMT) Assembly (insulator/contacts/lock):ZX64-B-5S-UNIT(14) Cover-top :ZX64-B-SLDA Cover- bottom :ZX64-SLDB Charging PCB wire soldering (SMT) Assembly (insulator/contacts/lock):ZX64-B-5S-UNIT(14) Cover :ZX64-B-SLDC Charging Earphone Direct wire solderingData Assembly (insulator/contacts/lock):ZX40-A-5S-UNIT Cover-top :ZX40-A-SLDA Cover- bottom :ZX40-SLDB 14 and 15 14 and 16 17 and 18 ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard Mating side configuration Application Mounting, termination styles/wire attachment IConfigurations Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors. Micro-B Receptacles Micro-AB Standard SMT Plugs Micro-B Part Number 3D Image Page SMT DIP ZX62D-B-5PA8 4 SMTReverse ZX62R-B-5P 5 SMTDrop-in ZX62M-B-5P(02) 5 SMT Standard ZX62-AB-5PA(11) 6 SMT DIP SMT SMT DIP Reverse ZX62D-AB-5P8 ZX62R-AB-5P ZX62RD-AB-5P8 Direct wire soldering Data Assembly (insulator/contacts/lock):ZX40-B-5S-UNIT(12) Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB 9 and 10 PCB wire soldering (right angle, through hole) Assembly (insulator/contacts/lock):ZX10-B-5S-UNIT(12) Cover-top :ZX10-B-SLDA Cover-bottom :ZX10-SLDB(3.3) 11 and 12 PCB wire soldering (straight, through hole)Earphone Assembly (insulator/contacts/lock):ZX20-B-5S-UNIT(12) Cover :ZX20-B-SLDC Cradles Micro-B Micro-A SMT DIP Cradle ZX80-B-5S 19With lock ZX80-B-5SA 19Without lock The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard IReceptacles G Micro B - Standard (Bottom mount), Shell SMT Part Number CL No. Packaging ZX62-B-5PA(11) 242-0033-8-11 3,500 pieces per reel No.57.9 2.15 7.5 2.5 0.6 5 2.8 No.1 PCB EDGE NO CONDUCTIVE TRACES 0.5 4.3 6.2 9.8 1.6 No.5 1.45 3.35 1.9 1.35 0.4 1.3 2.6 4.1 8.3 No.1 IRecommended PCB mounting pattern G Micro B - Standard (Bottom mount), Shell through hole Part Number CL No. Packaging ZX62D-B-5PA8 242-0056-3 2,000 pieces per reel All dimensions: mm 4.85 2.6 0.65 1.25(LAND) 2.9 0.85(TH) 0.2 NO CONDUCTIVE TRACES R0.325(TH) R0.325(TH) 0.5 1.3 1.9 2.75 3.35 1.5(TH)4.1 5.2 7.2 9.4 PCB EDGE 0.5(TH) R0.3(TH) 0.1 R0.525(LAND) 1.05(LAND) 0.4 0.65(TH) 1.35 No.5 R0.5(LAND) No.1 No.1 No.57.2 2.5 0.8 7.5 4.85 0.6 5 2.8 2.15 2.9 IRecommended PCB mounting pattern All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard PCB EDGE No.1 No.5 0.4 R0.4 3.6 2.4 4.3 6.9 2.6 1.3 7.8 8.8 1.9 7.15 5.15 2.4 1.4 1.05 1.5 4.7 C0.3 No.5No.1 4.8 4.7 0.25 1.3 2.6 7.5 11.5 7.5 0.6 1.25 1.23 2.74 4.3 5.3 1.9 IRecommended PCB mounting pattern No.5 NO CONDUCTIVE TRACES1.35 1.3 4.1 8.3 1.9 2.9 0.43 3.35 No.1 1.45 2.6 0.4 5.6 9.8 3.9 6.6 0.5 No.5 No.1 7.5 8.8 2.5 2.15 0.6 5 IRecommended PCB mounting pattern Part Number CL No. Packaging ZX62R-B-5P 242-0028-8 2,000 pieces per reel IReceptacles G Micro B - Reverse (Top mount) Shell SMT Part Number CL No. Packaging ZX62M-B-5P(02) 242-0024-7-02 2,000 pieces per reel G Micro B - Drop-in (Mid-mount), Shell SMT All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard No.1 No.5 0.5 1.3 1.9 1.45 3.35 1.35 2.6 0.4 6.2 9.8 4.3 1.6 8.3 4.1 PCB EDGE 8.8 No.5No.1 7.5 2.5 2.8 2.15 50.6 NO CONDUCTIVE TRACES IRecommended PCB mounting pattern IReceptacles G Micro AB - Standard (Bottom mount), Shell SMT Part Number CL No. Packaging ZX62-AB-5PA(11) 242-0045-7-11 3,500 pieces per reel 0.6 8.35 7.5 2.5 No.5No.1 4.45 0.6 2.025 3.125 2.8 1.3 1.7 1.5 0.65(TH) 1.05(LAND) R0.45(LAND) R0.25(TH) 0.4 2.6 4.45 1.35 1.9 3.4752.625 4.1 5.2 (0.5) (0.325) 9.4 0.5 1.5(TH) R0.3(TH) R0.5(LAND) 7.35(TH) 9(TH) 1.3 0.85(TH) 1.25(LAND) 3.125 No.5No.1 PCB EDGE NO CONDUCTIVE TRACES IRecommended PCB mounting pattern G Micro AB - Standard (Bottom mount), Shell through hole Part Number CL No. Packaging ZX62D-AB-5P8 242-0027-5 2,000 pieces per reel All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 2.9 4-R0.4 4.1 8.3 4.75 0.85 0.43 1.45 2.6 1.3 1.35 0.4 0.5 1.6 9.8 6.6 3.35 1.9 NO CONDUCTIVE TRACES No.5 No.1 PCB EDGE No.5 No.1 0.5985 5 2.15 2.5 7.5 IRecommended PCB mounting pattern IReceptacles G Micro AB - Reverse (Top mount), Shell SMT Part Number CL No. Packaging ZX62R-AB-5P 242-0035-3 2,000 pieces per reel All dimensions: mm 0.6 PCB EDGE NO CONDUCTIVE TRACES 9.4 No.5R0.25(TH) No.1 9(TH) 7.35(TH) 6.6 4.45 2.6 1.3 0.4 1.05(LAND) R0.2MAX R0.45(LAND) 0.65(TH) 1.35 1.5 1.7 3.475 R0.5(LAND)2.625 1.9 1.5(TH) 1.30.852.9 4.75 (0.5) (0.325)R0.3(TH) 3.125 0.555 1.25(LAND) 0.85(TH) 8.35 2.5 7.5 No.1No.5 4.45 50.6 2.025 3.125 IRecommended PCB mounting pattern G Micro AB - Reverse (Top mount), Shell through hole Part Number CL No. Packaging ZX62RD-AB-5P8 242-0025-0 2,000 pieces per reel All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard Plugs – assembled (not-terminated, without overmold) Components ZX40-SLDB ZX40-*-SLDA Cover-top ZX40-*-5S-UNIT Assembly (insulator/contacts/lock) *No PCB required Cover-bottom Cover-top Cover-bottom ZX10-SLDB Assembly (insulator/contacts/lock) *SMT PCB termination ZX10-B-5S-UNIT ZX10-B-SLDA ZX10 - PCB wire soldering Cover ZX20-*-SLDC Assembly (insulator/contacts/lock) *Straight through hole PCB termination ZX20-*-5S-UNIT ZX20 - PCB wire soldering Cover-bottom ZX64-SLDB Cover-top Assembly (insulator/contacts/lock) *Right angle through hole PCB termination ZX64-*-5S-UNIT ZX64-*-SLDA ZX64 - PCB wire soldering ZX40 - Direct wire soldering The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard G Micro B - Component, Cover-top - Direct wire soldering Part Number CL No. Packaging ZX40-B-SLDA 242-0003-7 4,000 pieces per reel 22.6 1.8 6.85 Contact HRS for Cable Termination Procedure Manual. IPlugs G Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering Part Number CL No. ZX40-B-5S-UNIT(12) 242-0002-4-12 14.1 7.9 No.1No.54.2 All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard IPlugs G Micro A, Micro B - Component, Cover-bottom - Direct wire soldering Part Number CL No. Packaging Cable dia. ZX40-SLDB 242-0004-0 4,000 pieces per reel Ø3.8 ZX40-SLDB(3.3) 242-0023-4 Ø3.3 16.2 16.2 ZX40-SLDB ZX40-SLDB(3.3) All dimensions: mm 22.6 6.85 8.6 4.75 1.8 G Assembled All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard All dimensions: mm Contact HRS for Cable Termination Procedure Manual. IPlugs G Micro B - Assembly (insulator/contacts/lock) - Right angle through hole PCB wire soldering (non-direct) G Micro B - Component, Cover-top - Right angle through hole A-A A A No.5 0.79 No.1 0.15 1.3 2.6 12.05 1 X 0.3 1.25 0.95 0.45 7.623.4 6.85 7.7 1.8 Part Number ZX10-B-SLDA CL No. Packaging 242-0031-2 4,500 pieces per reel Part Number ZX10-B-5S-UNIT(12) CL No. Packaging 242-0030-0-12 1,500 pieces per reel All dimensions: mm PCB mounting pattern *PCB required (not supplied) Max. thickness: 0.6mm No.5No.1 X 0.15 1.3 2.6 3.05 3.35 0.95 1.55 0.45 0.95 1.25 5-Ø0.9(LAND) 5 5-Ø0.5(TH) 7.3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 16.95 7.7 IPlugs G Micro B - Component, Cover-bottom – Right angle through hole 23.4 8.1 6.85 4.4 1.8 G Assembled Part Number ZX10-SLDB(3.3) CL No. Packaging 242-0032-5 4,500 pieces per reel All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard All dimensions: mm IPlugs G Micro B - Assembly (insulator/contacts/lock) - Straight through hole PCB wire soldering (non-direct) Contact HRS for Cable Termination Procedure Manual. Part Number CL No. ZX20-B-5S-UNIT(12) 242-0012-8-12 All dimensions: mm 1.3 2.6 5-0.15 1.4 12.2 1.55 0.35 7.9 No.1No.53.975 4.2 1.3 2.6 8.2 1.2(Through hole) 0.6(Through hole) 1.55 10.25 5-Ø0.7(Through hole) 5-Ø1.1(Land) R0.3(Through hole) 1(Land) 1.6(Land) R0.5(Land) No.1 No.5 PCB mounting pattern *PCB required (not supplied) Max. thickness: 0.6mm G Micro B - Component, Cover - Straight, through hole Part Number CL No. Packaging ZX20-B-SLDC 242-0022-1 4,000 pieces per reel 1.1 8.2 2-0.2 0.6 6.85 1.8 12.1 4.4 8.4 2-0.2 8.2 2.6 1.3 12.2 1.55 1.8 0.35 0.6 1.4 6.85 5-0.15 Assembly (insulator/contacts/lock) Cover G Assembled The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard G Micro B - Component, Cover-top – Right angle SMT Part Number CL No. Packaging ZX64-B-SLDA 242-0013-0 4,000 pieces per reel 24.7 6.85 1.8 All dimensions: mm 16.1 1.3 2.6 5-0.15 3.7 7.9 No.1No.5 IPlugs G Micro B - Assembly (insulator/contacts/lock) - Right angle SMT Contact HRS for Cable Termination Procedure Manual. Part Number CL No. ZX64-B-5S-UNIT(14) 242-0009-0-14 All dimensions: mm No.1No.5 1.3 2.6 6.8 0.5 1.1 1.5 0.35 PCB mounting pattern *PCB required (not supplied) Max. thickness: 1.0mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 24.7 4.1 8.4 6.85 1.8 Assembly (insulator/contacts/lock) Cover-top Cover-bottom G Assembled IPlugs G Micro B - Component, Cover-bottom - Right angle SMT Part Number CL No. Packaging ZX64-SLDB 242-0049-8 4,000 pieces per reel 18.25 All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 16.1 6.85 8.4 4.1 1.8 Assembly (insulator/contacts/lock) Cover-top Cover-bottom G Assembled All dimensions: mm 6.85 1.8 16.1 IPlugs G Micro B - Component, Shell/cover – Right angle SMT Part Number CL No. Packaging ZX64-B-SLDC 242-0018-4 4,000 pieces per reel Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard Part Number CL No. Packaging ZX40-A-SLDA 242-0011-5 4,000 pieces per reel 22.6 1.8 6.85 G Micro A - Component, Cover-top - Direct wire soldering All dimensions: mm Contact HRS for Cable Termination Procedure Manual. Part Number CL No. ZX40-A-5S-UNIT 242-0010-2 IPlugs G Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering 12.4 7.9 4.2 No.1No.5 Contacts Insulator body (color grey) All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 4.75 22.6 6.85 8.6 1.8 Assembly (insulator/contacts/lock) Cover-top Cover-bottom G Assembled Part Number CL No. Packaging Cable dia. ZX40-SLDB 242-0004-0 4,000 pieces per reel Ø3.8 ZX40-SLDB(3.3) 242-0023-4 Ø3.3 IPlugs G Micro A, Micro B - Component, Cover-bottom - Direct wire soldering 16.2 16.2 ZX40-SLDB ZX40-SLDB(3.3) All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard 8-R0.25 Contact No.5Contact No.1 2-Ø2.2(Hole) 16.55 0.37 8-R0.55 3.15 1.3(Through hole) 1.9(Land) 1.1(Land) 0.5(Through hole) 1.86 1.3 2.6 6.65 1.6(Through hole) 0.5(Through hole)0.4 2.9 2.2 1.1(Land) 2.2(Land) G Micro B, without lock Part Number CL No. Packaging ZX80-B-5SA 242-0019-7 100 pieces 6.85 No.5 No.1 2-0.26.65 1.3 2.6 5-0.15 1.88 2.78 2.42 0.37 2.32 3.52 16.55 20.55 2.5 7.1 13 1.15 1.86 3.15 0.7 R1.6 8.55 I PCB mounting pattern IPlug-Vertical, cradle mount, Shell through hole G Micro B, with lock 6.85 No.1No.5 2-0.26.65 1.3 2.6 5-0.15 1.88 2.78 2.42 0.37 2.32 3.52 16.55 20.55 2.5 7.1 13 1.15 1.86 3.15 0.7 R1.6 8.55 Part Number CL No. Packaging ZX80-B-5S 242-0017-1 100 pieces All dimensions: mm All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

ZX SeriesGMicro-USB connectors meeting requirements of USB 2.0 Standard I Precautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function. I Recommended Temperature Profile - Receptacles G Using lead-free solder paste 150ç (S) 180ç 120 S (ç) 250 250ç 220çmin. 70 S 200 150 100 HRS test condition Solder composition :Paste,96.5%Sn/3.0%Ag/0.5%Cu Test board :Glass epoxy 35mm∞35mm∞0.8mm thick The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations. Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com I Packaging Specifications A B 1.75 4 0.5 1.8 Ø1.5 Unreeling direction G Embossed carrier tape dimensions G Reel Dimensions D Ø13 Ø380 C Unreeling direction Part Number A dimension B dimension ZX62-B-5PA 24 11.5 ZX62-AB-5PA 24 11.5 ZX62M-B-5P 24 11.5 Other 16 7.5 Part Number C dimension D dimension Note : Tape and reel packaging (2,000 pieces/reel). Order by number of reels. ZX62-B-5PA 30.4 24.4 ZX62-AB-5PA 30.4 24.4 ZX62M-B-5P 30.4 24.4 Other 22.4 16.4 The contents of this catalog are current as of date of 08/2010. Contents are subject to change without notice for the purpose of improvements. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.