ZX0-LD100A61

ZX1 OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Features

Refer to the Precautions for all Photoelectric Sensors and Safety Precautions on page 5. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. A CMOS image sensor combines with a step-less laser power adjustment algorithm to produce stable detection of all types of workpieces from black rubber with low reflectivity to stainless steel and other highly glossy materials. The use of a CMOS image sensor ensures high resolution and enables detection of small level differences. An extremely narrow laser beam spot ensures detection of small workpieces. Light-emitting element Light-receiving element CMOS Image Sensor For bright colors with high reflectivity: Low-power laser beam For dark colors with low reflectivity: High-power laser beam Step-less Laser Power Adjustment Algorithm Model Sensing distance Detectable level difference*1 Spot diameter*2 ZX0-LD50 ZX0-LD100 ZX0-LD300 ZX0-LD600 40 to 60 mm 65 to 135 mm 150 to 450 mm 200 to 1,000 mm 0.2 mm 0.7 mm 3.0 mm 15.0 mm 0.17 mm 0.33 mm 0.52 mm 0.56 mm *1. When the ambient temperature is 10 to 40°C. *2. Reference values at the center of sensing distance. Models with four different distances, from long-distance to short-distance detection, cover a wide range of user designs. The built-in amplifier achieves a smaller body. And because you do not need to install an amplifier unit, installation work and footprint are reduced. Also, an IP67 body and robot cable are used to eliminate installation environment restrictions. ZX0-LD50 ZX0-LD100 ZX0-LD300 ZX0-LD600 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1 m Sensing distance: 40 to 60 mm Standard detectable level difference: 0.2 mm* Sensing distance: 65 to 135 mm Standard detectable level difference: 0.7 mm* Sensing distance: 150 to 450 mm Standard detectable level difference: 3.0 mm* Sensing distance: 200 to 1,000 mm Standard detectable level difference: 15.0 mm* *When the ambient temperature is 10 to 40°C. Stability Simplicity Detection of Essentially Any Workpiece CMOS Image Sensor That Stably Detects Object without Being Influenced by Color, Material, or Surface Conditions CMOS image sensor Stable Detection of Small Level Differences or Small Workpieces High Resolution and Narrow Beam Provide Stable Detection of Small Level Differences and Small Workpieces Elimination of Installation Restrictions Models with Different Distance Specifications for Installation in Essentially Any Location and with Built-in Amplifier.

Ordering Information

Sensors (Refer to Dimensions on page 6) *Sensors with Class 1 lasers are also available. Add an “L” to the end of the model number when ordering. (Example: ZX0-LD50A61L 2M) Accessories (sold separately) Extension Cables for Pre-wired Connector Models (Refer to Dimensions on page 7) Mounting Brackets A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required. (Refer to Dimensions on page 7) Appearance Connection method Cable length Sensing distance Model NPN output PNP output Pre-wired 2 m ZX0-LD50A61 2M * ZX0-LD50A81 2M * 5 m ZX0-LD50A61 5M ZX0-LD50A81 5M Pre-wired connector 0.5 m ZX0-LD50A66 0.5M ZX0-LD50A86 0.5M Pre-wired 2 m ZX0-LD100A61 2M * ZX0-LD100A81 2M * 5 m ZX0-LD100A61 5M ZX0-LD100A81 5M Pre-wired connector 0.5 m ZX0-LD100A66 0.5M ZX0-LD100A86 0.5M Pre-wired 2 m ZX0-LD300A61 2M * ZX0-LD300A81 2M * 5 m ZX0-LD300A61 5M ZX0-LD300A81 5M Pre-wired connector 0.5 m ZX0-LD300A66 0.5M ZX0-LD300A86 0.5M Pre-wired 2 m ZX0-LD600A61 2M * ZX0-LD600A81 2M * 5 m ZX0-LD600A61 5M ZX0-LD600A81 5M Pre-wired connector 0.5 m ZX0-LD600A66 0.5M ZX0-LD600A86 0.5M Cable length Model 10 m ZX0-XC10R 20 m ZX0-XC20R Applicable sensors Appearance Model Contents ZX0-LD50@ ZX0-LD100@ E39-L180 Mounting Bracket: 1 Nut plate: 1 Phillips screws (M3 × 30): 2 ZX0-LD300@ ZX0-LD600@ E39-L181 Mounting Bracket: 1 Nut plate: 1 Phillips screws (M4 × 35): 2 50 ± 10 mm 100 ± 35 mm 135 150 300 ± 150 mm 450 200 600 ± 400 mm 1,000

Ratings and Specifications Note: Refer to the table given below for the ratings and specifications of Sensors with Class 1 lasers. *1 The values were measured at the center of the sensing distance using OMRON’s standard sensing object (white ceramic). *2. Classified as Class 2 by IEC60825-1 criteria in accordance with the FDA standard provisions of Laser Notice No. 50. CDRH registration has been completed. (Center for Devices and Radiological Health) (Accession Number: 1210040) *3. Spot diameter: Defined as 1/e2 (13.5%) of the central intensity at the measurement center distance. False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object. Accurate measurements may not be possible for workpieces that are smaller than the spot diameter. *4. IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected. *5. Use a Pre-wired Connector Model together with an Extension Cable (10 m or 20 m). Ratings and Specifications of Sensors with Class 1 lasers (ZX0-LD@L) The ratings and specifications that are different from those of the Sensors with Class 2 lasers are given below. Accession Number: 1210040 Model NPN output ZX0-LD50A61 ZX0-LD50A66 ZX0-LD100A61 ZX0-LD100A66 ZX0-LD300A61 ZX0-LD300A66 ZX0-LD600A61 ZX0-LD600A66 Item PNP output ZX0-LD50A81 ZX0-LD50A86 ZX0-LD100A81 ZX0-LD100A86 ZX0-LD300A81 ZX0-LD300A86 ZX0-LD600A81 ZX0-LD600A86 Sensing distance 50 ± 10 mm 100 ± 35 mm 300 ± 150 mm 600 ± 400 mm Standard detectable level difference Ambient temperature of 10 to 40°C 0.2 mm 0.7 mm 3.0 mm 15 mm Ambient temperature of −10 to 55°C 0.5 mm 1.0 mm 6.0 mm 25 mm Light source (wavelength) Visible-light semiconductor laser (wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class 2 *2) Spot diameter (reference value) (Defined at the measurement center distance) Power supply voltage 10 to 30 VDC (including 10% ripple (p-p)) Power consumption 2,500 mW max. (105 mA max. at 24 VDC, 210 mA max. at 12 VDC) Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA)) Monitor output Current output: 4 to 20 mA, maximum load resistance: 300 Ω (The output is 20 mA for the nearest point in the measurement range in respect to the Sensor and 4 mA for the farthest point.) Functions Smart tuning, keep function, background removal, OFF-delay timer, ON-delay timer, one-shot timer, ON/OFF-delay timer, zero reset, area output, eco function, hysteresis width setting, and setting initialization Indicators Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue) Response time Judgment output Super-high-speed (SHS) Mode: 1.5 ms, Very-high-speed (VHS) Mode: 3 ms, High-speed (HS) Mode: 10 ms, or Standard (STND) Mode : 50 ms Laser OFF input 200 ms max. Zero reset input 200 ms max. Ambient illumination Illumination on received light surface: 7,500 lx or less (incandescent light) Illumination on received light surface: 5,000 lx or less (incandescent light) Ambient temperature Operating: −10 to 55°C, Storage: −15 to 70°C (with no icing or condensation) Ambient humidity Operating and storage: 35% to 85% (with no condensation) Dielectric strength 1,000 VAC, 50/60 Hz, 1 minute Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions Shock resistance (destruction) 500 m/s2 3 times each in X, Y, and Z directions Degree of protection *4 IEC IP67 Connection method *5 Pre-wired model (Standard cable length: 2 m) Pre-wired connector model (Standard cable length: 0.5 m) Weight (packed state/ sensor only) Pre-wired models (2 m) Approx. 240 g / Approx. 180 g Approx. 270 g / Approx. 210 g Pre-wired models (5 m) Approx. 450 g / Approx. 330 g Approx. 480 g / Approx. 360 g Pre-wired connector Materials Case and cover: Polybutylene terephthalate, Optical window: Glass, Cable: PVC Accessories Instruction sheet, Laser warning label (English), and FDA certification label Model Item ZX0-LD50A61L/ZX0-LD50A81L ZX0-LD100A61L/ZX0-LD100A81 ZX0-LD300A61L/ZX0-LD300A81L ZX0-LD600A61L/ZX0-LD600A81L FDA Class Class1 0.24 mW max. IEC/EN Class Class1 0.24 mW max. Ambient illumination Illumination on received light surface 5,000 lx or less (incandescent light) Illumination on received light surface 2,500 lx or less (incandescent light) Connection method Pre-wired model (2 m) Accessories Instruction sheet and Explanatory label (English), FDA certification label

Engineering Data (Reference Value) Spot Diameter Vs. Distance I/O Circuit Diagrams NPN Output Model PNP Output Model ZX0-LD50@ ZX0-LD100@ ZX0-LD300@ ZX0-LD600@ 0.2 0.4 0.6 0.8 1.0 1.2 40 45 50 55 60 Distance [mm] X direction Y direction X Y Spot diameter [mm] 0.2 0.4 0.6 0.8 1.0 1.2 65 135 120 1301101009080 70 X Y Distance [mm] X direction Y direction Spot diameter [mm] 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 150 450 400350300250200 X Y Distance [mm] X direction Y direction Spot diameter [mm] 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 200 1000 800600400 X Y Distance [mm] X direction Y direction Spot diameter [mm] Brown: 10 to 30 VDC 10 to 30 VDC White: OUT1 judgment output Green: OUT2 judgment output Blue: GND (0 V) Orange: TUNE1 input Pink: TUNE2 input Purple: Zero reset input Red: LD-OFF input Black: Monitor output 300 Ω max. Shield: Monitor GND Current output 4 to 20 mA Internal circuits Load Load Load Brown: 10 to 30 VDC 10 to

30 VDC

White: OUT1 judgment output Green: OUT2 judgment output Blue: GND (0 V) Orange: TUNE1 input Pink: TUNE2 input Purple: Zero reset input Red: LD-OFF input Black: Monitor output 300 Ω max. Shield: Monitor GND Current output 4 to 20 mA Internal circuits Load Load Load

Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/. The ZX0-LD uses a laser as the light source. Lasers are classified based on EN standard (EN 60825-1).

• The ZX0-LD has the following WARNING label or explanatory label on the side of the sensor. Using in the U.S. When using devices in which ZX0-LD is installed in the U.S., the devices are subjected to the U.S. FDA (Food and Drug Administration) laser regulations. ZX0 series is classified into Class 2 or Class 1 by the standard of IEC/EN60825-1 according to deviations of Laser Notice No. 50 of this standard, and reported to CDRH (Center for Devices and Radiological Health). (Accession Number: 1210040) Replace the WARNING label or Explanatory Label with the corresponding English label and put the FDA Certification label (supplied with the sensor). Using in a country other than the U.S. For countries other than Japan and the U.S., warning labels or explanatory labels must be replaced by English ones (supplied with the product). Using in Europe ZX0-LD@@ are classified in Class 2 under EN 60825-1, and ZX0- LD@@L are classified in Class 1 under EN 60825-1. Note: For Precautions for safe use and Precautions for correct use, refer to the Instruction Sheet supplied with the product. This datasheet contains information only for selecting the appropriate model. Be sure to read the Instruction Sheet for usage precautions prior to using the product. SAFETY PRECAUTIONS FOR USING LASER EQUIPMENT WARNING Do not expose your eyes to the laser radiation either directly or indirectly (i.e., after reflection from a mirror or shiny surface). Loss of sight may possibly occur in case of the exposure to laser high power density. Do not disassemble the product. Doing so may cause the laser beam to leak, resulting in the danger of visual impairment. ZX0-LD@@ Laser Warning Label ZX0-LD@@L Explanatory Label

(Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless 2.5 37.8 2.4 18.7 Reference surface Reference surface Reference surface Emitter center position mark Emitter axis Two, 3.2 dia (mounting holes) 10.5 15.1 42.3 14.23 Emitter center 16.7 10.1 Emitter axis Receiver axis (10.5) (2)35.3 3.2 52.546.1 (Measurement center distance) Vinyl insulated round robot cable, 6.5 dia., 9 conductors (Conductor cross section: 0.125 mm², Insulator diameter: 0.7 mm) Standard length: 2 m (pre-wired model), 0.5 m (pre-wired connector model) Minimum bending radius: 39 mm A (10.2) 11.7 24.1 Mounting hole dimensions Emitter center position mark Two, M3Reference surface Reference surface 23.6±0.1 3.2±0.1 35.3±0.1 49.3±0.1 ZX0-LD100: L = 100, A = 11.5° Pre-wired Models ZX0-LD50A@1(L) ZX0-LD100A@1(L) Pre-wired Connector Models ZX0-LD50A@6 ZX0-LD100A@6 Emitter center Emitter axis Emitter axis Receiver axis Reference surface Reference surface Reference surface Two, 4.5 dia (mounting holes) (13.6) 50.1 (1.9) 4.5 45.6 57 66 15.5 (Measurement center distance) (10.2) 10.1 55.8 10.7 27.2 13.6 50.3 Vinyl insulated round robot cable, 6.5 dia., 9 conductors (Conductor cross section: 0.125 mm², Insulator diameter: 0.7 mm) Standard length: 2 m (pre-wired model), 0.5 m (pre-wired connector model) Minimum bending radius: 39 mm Mounting hole dimensions Emitter center position mark Emitter center position mark Two, M4 4.5±0.1Reference surface Reference surface 30.1±0.1 45.6±0.1 61.5±0.1 21.3 ZX0-LD600: L = 600, A = 3.4° Pre-wired Models ZX0-LD300A@1(L) ZX0-LD600A@1(L) Pre-wired Connector Models ZX0-LD300A@6 ZX0-LD600A@6 15.5 dia. 39.8 TUNE button [ST] Smart tuning indicator (blue) [LD ON] Laser ON indicator (green)[MENU] Menu indicator (orange) [ZERO] Zero reset indicator (orange) OUT1 output indicator (orange) OUT2 output indicator (orange) UP button DOWN button MODE button Digital display Display, Indicators, and Controls Pre-wired connector

Accessories (sold separately) Shield 37.3 Bending start position: 40 mm 15 dia. L * Vinyl insulated round robot cable, 6.5 dia. Minimum bending radius: 39 mm * Cable length (L) is as follows. ZX0-XC10R: 10 m, ZX0-XC20R: 20 m Extension Cables for Pre-wired Connector Models ZX0-XC10R (10 m) ZX0-XC20R (20 m) Nut plate Mounting Bracket Mounting Bracket Nut plate 46.1 11.7 4°5.5° 41.3 32.1 4.8 2-R2 47.6 53.6 P=0.5 2-M3 3.5°8° 15.5 42.4 6.2 4.5 dia. 67.159.1 P=0.7 2-M4 7.9 3.2 41.3 4.4 22.5 45.6 18.1 37.8 3.2 8.3 55.2 25.6 22.3 51.2 18.5 52.6 Reference surface Reference surface Mounting Bracket Nut plate Mounting Bracket Nut plate 2-R2 3.5 dia. 3.5 3.5 6.7 6.5 14.8 (21.7) 12 12 7.5 4.5 19.1 4.5 9.1(27.6) 18.5 Material : Stainless steel (SUS304) Thickness : 1.5 mm Material : Stainless steel (SUS304) Thickness : 2.0 mm Accessories : Two phillips screws (M3×30, P = 0.5, Stainless steel) and one nut plate Material : Stainless steel (SUS304) Thickness : 2.0 mm Material : Stainless steel (SUS304) Thickness : 2.0 mm Accessories : Two phillips screws (M4×35, P = 0.7, Stainless steel) and one nut plate Mounting Bracket for ZX0-LD50@/ZX0-LD100@ E39-L180 Mounting Bracket for ZX0-LD300@/ZX0-LD600@ E39-L181 Installation Method (ZX0-LD50@/ZX0-LD100@) Using E39-L180 Mounting Bracket Installation Method (ZX0-LD300@/ZX0-LD600@) Using E39-L181 Mounting Bracket

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABL Y MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY , NEGLIGENCE OR STRICT LIABILITY . Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERL Y RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

Authorized Distributor: In the interest of product improvement, specifications are subject to change without notice. Cat. No. E444-E1-01 0815 (0815) © OMRON Corporation 2015 All Rights Reserved. OMRON Corporation Industrial Automation Company OMRON ELECTRONICS LLC

2895 Greenspoint Parkway, Suite 200

Hoffman Estates, IL 60169 U.S.A. Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Contact: www.ia.omron.com Kyoto, JAPAN OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

PuDong New Area, Shanghai, 200120, China CSM_1_1_0815 Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200