ZE05H-16DS-2H

ZE05 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

2023.5ɹ ZE05 Series ■Features 1. Space-saving (0.5 size terminal, 2mm pitch) Space-saving design that contributes to size reduction of end product 2. High Heat Resistance : up to 125℃ Suitable for use in 125ˆ environments. 3. High Vibration Resistance Can be used in vehicle environments in which intense vibration is applied. 4. Rated Current : 5A (Single Pin Power Supply) / 2A (All Pins Power Supply) Suitable for use in 125ˆ environments. 5. Retainer Guarantees 40N Tensile Strength Durable against cable routing ˔High Vibration Resistance Terminal Design ˔High Tensile Strength due to Retainer *The terminal is fl ipped upside down so the beat is easier to see. Tensile Strength of 40N Secured Double-Layered Spring ᶃDouble-Layered Spring Design Suppresses outer vibration by increasing the contact force ᶄ3-point contact design Suppresses outer vibration by increasing the contact force 1 spring+ 2 beats= 3 contact points

1 Spring

2 Beats

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Product Specifi cations Ratings Rated Current : 2A (All pins power supply) 5A (Single pin power supply) Operating Temperature : -40 to +125ˆ Storage Temperature Range : -10 to +60ˆ (Note 1) Rated Voltage : 60V AC/DC Storage Relative Humidity Range : 85% RH or less (No condensation) (Note 1) Items Specifications Conditions 1. Contact Resistance 10m Њ Max. Measured at 1A DC 2. Insulation Resistance 100M Њ Min. Measured at 500V DC 3. Withstanding Voltage There shall be no dielectric breakdown. Voltage of 1000V AC for 1 min. 4. Mating Durability Contact Resistance : 20m Њ Max. 30 Insertion/Extraction cycles 5. Vibration Resistance No electrical discontinuity of 1Жs or more. Contact Resistance : 20mЊ Max. Frequency : 20 to 200Hz (Constant Acceleration of 88m/s2) 1 Cycle 3 min. (round trip), 3 hours in 3 directions 6. Lock Strength 100N Min. Lock breaking strength measured when pulling in mating axis direction 7ɽ Humidity Resistance Contact Resistance : 20mЊ Max. Insulation Resistance : 100MЊ Min. Left for 96 hours at a temperature of 60ˆ and a relative humidity humidity 90 to 95% 8. Thermal Shock Contact Resistance : 20m Њ Max. Temperature : -40˃C ˠ Room temperature ˠ 125˃C ˠ Room temperature Time: 30 ˠ 5 ˠ 30 ˠ 5 minutes for 1000 cycles 9. Heat Resistance Contact Resistance : 20m Њ Max. Left at 140 ˆ for 120 hours 10ɽ Cold Resistance Contact Resistance : 20m Њ Max. Left at -40 ˆ for 120 hours 11ɽ Sulfuric Acid Gas Resistance Contact Resistance : 20m Њ Max. Left in sulfuric acid gas at room temperature with a concentration of 25ppm and 75% or more RH for 96 hours while unmated Note 1 : This storage temperature and humidity is for long-term storage of unused products. ■Materials / Finish Component Part Material Finish UL Standard Receptacle Housing PA Resin Black UL94V-0 Terminal Brass Tin Plating ʵ Solder Tabs Brass Tin Plating ʵ Plug Housing PA Resin Black UL94V-0 Retainer PA Resin Natural UL94V-0 Crimp Terminal Terminal Copper Alloy Tin Plating ʵ

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.ɹ ˔Receptacle ZE05 H - 12 D P - 2H ˔Plug ZE05 - 12 D S - HU/R ˔Crimp Terminal ZE05 - 2022 SCF ⁞ ⁠ ˔Receptacle Combination Chart ⁞Series Name ɿZE05 Solder Tabs H ɿ SMTɹN/A ɿ DIP ⁠No. of Pos. ɿ 2ɺ4ɺ5ɺ8ɺ12ɺ16ɺ20ɺ24 ⁡Rows D ɿ 2 Rows N/A : 1 Row ⁢Connector Type P ɿ Receptacle S ɿ Plug ⁣Pitch 2 ɿ 2mm ⁤Part Type H : Right Angle V : Straight HU/R : Housing/Retainer ⁞Series Name ɿZE05 Applicable Cable Size 2022 ɿ 20, 22 AWG (0.3-0.5SQ) ⁠Form Type/ Packaging SCF ɿ Female terminal, Reel ZE05H-P-2H ZE05-P-2H ZE05H-P-2V ZE05-P-2V ˔Plug ZE05-**S-HU/R ˔Crimp Contact ZE05-2022SCF

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Right Angle Receptacle, SMT Solder Tabs ■Right Angle Receptacle, DIP Solder Tabs Unit : mm Part No. HRS No. No. of Pos. A B C D ZE05H-2P-2H 752-2109-0 2 2 12.32 13.7 8.34ZE05H-4P-2H 752-2110-0 4 6 16.32 17.7 ZE05H-5P-2H 752-2120-0 5 8 18.32 19.7 ZE05H-8DP-2H 752-2112-0 8 10 18.52 19.9 8.84 ZE05H-12DP-2H 752-2113-0 12 14 22.52 23.9 ZE05H-16DP-2H 752-2114-0 16 20 28.52 29.9 ZE05H-20DP-2H 752-2115-0 20 26 34.52 35.9 ZE05H-24DP-2H 752-2116-0 24 30 38.52 39.9 Unit : mm Part No. HRS No. No. of Pos. A B C D ZE05-2P-2H 752-2100-0 2 2 12.32 9.9 8.34ZE05-4P-2H 752-2101-0 4 6 16.32 13.9 ZE05-5P-2H 752-2121-0 5 8 18.32 15.9 ZE05-8DP-2H 752-2103-0 8 10 18.52 16.1 8.84 ZE05-12DP-2H 752-2104-0 12 14 22.52 20.1 ZE05-16DP-2H 752-2105-0 16 20 28.52 26.1 ZE05-20DP-2H 752-2106-0 20 26 34.52 32.1 ZE05-24DP-2H 752-2107-0 24 30 38.52 36.1 Note 1 : The sales unit is 1 reel (300pcs/ reel). Please order by number of reels. A±0.2 1±0.2 14.8±0.5 B±0.3 D±0.3 C±0.3 B±0.3 C±0.3 2.1 D±0.3 A±0.2 1±0.2 14.8±0.5

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Straight Receptacle, SMT Solder Tabs ■Straight Receptacle, DIP Solder Tabs Unit : mm Part No. HRS No. No. of Pos. A B C D E ZE05H-2P-2V 752-2309-0 2 2 - 14.6 13.22 ZE05H-4P-2V 752-2310-0 4 6 - 18.6 17.22 ZE05H-8DP-2V 752-2312-0 8 10 8 20.8 10.5 19.42 ZE05H-12DP-2V 752-2313-0 12 14 12 24.8 23.42 ZE05H-16DP-2V 752-2314-0 16 18 20 30.8 29.42 ZE05H-24DP-2V 752-2316-0 24 30 28 40.8 39.42 Unit : mm Part No. HRS No. No. of Pos. A B C D E ZE05-2P-2V 752-2300-0 2 2 - 10.8 13.22 ZE05-4P-2V 752-2301-0 4 6 - 14.8 17.22 ZE05-8DP-2V 752-2303-0 8 10 8 17 10.5 19.42 ZE05-12DP-2V 752-2304-0 12 14 12 21 23.42 ZE05-16DP-2V Under Development (Note 3) 16 18 20 27 29.42 ZE05-24DP-2V Under Development (Note 3) 24 30 28 37 39.42 Note 1 : The sales unit is 1 reel (250pcs/ reel). Please order by number of reels. Note 2 : Suction tape is attached as a standard. Note 3 : Pin counts with the HRS No. left blank are currently under development. For details contact a Hirose sales representative. E±0.3 13.2±0.3 D±0.5 2±0.2 A±0.2 B±0.2 C±0.3 2±0.2 13.2±0.3 E±0.3 C±0.3 2.1 2±0.2 B±0.2 A±0.2 2±0.2D±0.5

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Plug 15.3±0.5 A±0.5 B±0.5 C±0.30.6±0.3 Unit : mm ZE05-2S-HU/R 752-2200-0 2 350 8.8 9.7 5.3ZE05-4S-HU/R 752-2201-0 4 350 12.8 ZE05-5S-HU/R 752-2211-0 5 350 14.8 ZE05-8DS-HU/R 752-2203-0 8 385 13.6 10.2 6.44 ZE05-12DS-HU/R 752-2204-0 12 350 17.6 ZE05-16DS-HU/R 752-2205-0 16 280 23.6 ZE05-20DS-HU/R 752-2206-0 20 245 29.6 ZE05-24DS-HU/R 752-2207-0 24 210 33.6 Note 1 : The product is sold in sets so please order based on number of sets.

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Crimp Terminal for Plug ■Applicable Crimping Tool 16.44±0.5 1.33±0.3 5.6±0.1 13.24±0.5 1.3±0.3 Part No. HRS No. Type Quantity Finish ZE05-2022SCF 752-2001-0 Reel Terminal 10,000pcs/reel Tin Plating Note 1 : Please consult with a Hirose sales representative when considering cables other than the applicable cables. Note 2 : Any problems that occur from using tools other than those specified by Hirose are not covered by warranty. Type Part No. ̧̨̝ ̣o. Applicable Cable Applicable Contact Hirose Crimping Tool CM-105C 901-0001-0 ʵʵ Applicator for Hirose Crimping Tool AP105-ZE05-2022S 901-5239-0 ʵ ZE05-2022SCFJapan Automatic Machine Applicator (Note 1) CHX022700H ʵʵ Hand Tool (Note 2) HT802/ZE05-2022S 780-0045-0 0.3sq, 0.5sq (Note 3) ZE05-2022SCF (Note 4) Retainer Release Tool (̴̣̾̓ 5) ZE05-2DC-HU/R/RE-MD 902-5144-0 ʵʵ ZE05-12DC-HU/R/RE-MD 902-5143-0 ʵʵ Terminal Extraction Tool ZE05/RE-MD 902-5145-0 ʵ ZE05-2022SCF Note 2 : Hand tools are developed as a prototype tool during product development. Use an applicator for mass production. Note 3 : Applicable cables are limited to those listed in the table. Note 4 : Cut the reel terminal for use with the hand tool. Applicable contacts are limited to those listed in the table. Note 5 : Contact a Hirose representative about the retainer release tool for 20 and 24pos. ZE05-2DC-HU/R/RE-MD ʜSingle row products only (2, 4, 5pos.) ZE05-12DC-HU/R/RE-MD ʜ2 row products only (8, 12, 16pos.) Note 6 : Conduct crimping based on the "Crimping Standards" and "Crimping Conditions Table". Note 7 : Any problems that occur from using tools other than those specified by Hirose are not covered by warranty.

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ⿆Usage Precautions 1. Excessive pull force during unmating may damage the connector. If it is difficult to remove, push in lightly once and then release the lock. 2. Always make sure to turn off the power before reseating the connector. 3. Do not have direct contact on the terminal when electricity is flowing since it is extremely dangerous. 4. Contact a Hirose representative for harness procedures or handling manuals. ɾRecommended Temperature Profile (Right Graph) ɹReflow Heating Method Used ɹɹɹ ɿ ɹɹ Far infrared, air atmosphere or nitrogen ɹReflow Cycles : 2 times ɹPeak Temperature : 250 ˆ ɹ230ˆ Min. : 20 to 40s ɹPreheat Temperature : 150 to 180ˆ 90 to 120s ɾHand Solder/ Solder Iron Temperature : 280 to 300 ˆ for 2 seconds or less ɾTerminal co-planarity is 0.1mm Max. ɾRecommended board thickness : T=1.6mm ɾRecommended solder thickness : 0.15mm 5JNFʢTʣ 5FNQFSBUVSFʢˆʣ UPT ʶT The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 05/2023. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN https://www.hirose.com/