ZACS622-100W MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ZAC622-100WSX+ ZACS622-100WS+ The Big Deal

  • High power, up to 100W as a splitter
  • Low insertion loss, 0.5 dB
  • High isolation, 22 dB Product Overview Mini-Circuits’ ZACS622-100W+ is a 2-way 0˚ splitter/combiner providing very high power handling and low inser- tion loss across 650 to 6200 MHz, covering the primary wireless communications bands as well as UHF, SatCom, and more. Its outstanding combination of high power and low loss minimize power dissipation due to intrinsic losses and provide excellent signal fidelity from input to output. This model also provides high port-to-port isola - tion and very low amplitude and phase unbalance. It comes housed in a rugged aluminum alloy case (3.19 x 4.18 x 4.09”) with your choice of SMA or N-Type connectors and an optional heat sink and fan for cooling. Key Features Feature Advantages Wideband, 650 to 6200 MHz ZACS622-100W+ covers many wireless communications bands, making it suitable for a wide variety of applications. High power handling:
  • 100W as a splitter
  • 2W as a combiner Suitable for many high power applications. Low insertion loss, 0.5 dB Very low insertion loss minimizes intrinsic losses, making this model a suitable candidate for high power signal distribution applications where low loss is a requirement. Low unbalance:
  • 0.15 dB amplitude unbalance
  • 2˚ phase unbalance ZACS622-100W+ produces nearly equal output signals, ideal for parallel path / multichannel systems. DC Passing, 1.6A (0.8A each port) Supports applications where DC power is needed at later stages in the system. ZACS622-100W+

2 Way-0° 50Ω Up to 100W 650 to 6200 MHz

High Power, DC Pass

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Maximum Ratings Coaxial Connections SUM PORT S PORT 1 1 PORT 2 2 Operating Temperature -55°C to 75°C Storage Temperature -55°C to 100°C DC PASS 1.6A (0.8A/each port) FAN DC Supply 24V FAN Current 0.15A ZACS622-100W+ REV. A M158797 ZACS622-100W+ ED-15102001 JC/CP/AM 161028 High Power DC Pass

Features

  • high power, up to 100W as splitter
  • high power, up to 2.0W as combiner
  • low insertion loss, 0.5 dB typ.
  • high isolation, 22 dB typ.
  • excellent VSWR, 1.20 typ.

Applications

  • UHF TV
  • MMDC
  • SATCOM
  • cellular/ISM/SMG/GSM
  • satellite distribution
  • GPS/L BAND (MARSAT)
  • PCS/DCS/UMTS Outline Dimensions ( ) A B C D E F G H J K L M N P Q R S T wt *190 grams without heatsink Outline Drawing inch mm Permanent damage may occur if any of these limits are exceeded. Electrical Schematic 1. Over -55°C to +55°C. Derate linearly to 20% of rating at 75°C. All outputs must terminate 50 ohm (VSWR 1.5:1 or better) 2. As a combiner of non-coherent signals, max. power per port is 2.5W. Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Max. Unit Frequency Range 650 6200 MHz Insertion Loss Above 3.0 dB 1000-1500 — 0.3 0.6 dB1500-4000 — 0.3 0.7 4000-6000 — 0.5 0.8 650-6200 — 0.5 1.1 Isolation 1000-1500 14.0 20 — dB 1500-4000 20 25 — 4000-6000 19 24 — 650-6200 10 22 — Phase Unbalance 1000-1500 — 0.5 2.0 Degree 1500-4000 — 1.0 4.0 4000-6000 — 2.0 5.0 650-6200 — 2.0 6.0 Amplitude Unbalance 1000-1500 — 0.1 0.2 dB1500-4000 — 0.1 0.3 4000-6000 — 0.15 0.4 650-6200 — 0.15 0.5 VSWR (Port S) 1000-1500 — 1.40 1.75 1500-4000 — 1.15 1.35 4000-6000 — 1.30 1.65 650-6200 — 1.50 2.05 VSWR (Port 1-2) 1000-1500 — 1.15 1.25 1500-4000 — 1.15 1.25 4000-6000 — 1.20 1.40 650-6200 — 1.20 1.55 Power Input as combiner2 600-3600 — — 2.0 W as splitter1 650-3600 — — 100 3600-6200 50 3Heat sink and fan not included. Alternative heat sinking and heat removal must be provided by the user to limit maximum base-plate temperature to 55°C, in order to ensure proper performance. For reference, this requires thermal resistance of user’s external heat sink to be 1.3°C/W max. CASE STYLE: CP1829 Connectors Model SMA ZACS622-100WS+ SMA ZACS622-100WSX+ 3 N-TYPE ZACS622-100WN+ N-TYPE ZACS622-100WNX+ 3 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications ZAC622-100WSX+ ZACS622-100WS+ PORT S RF+DC PORT 1 RF+DC PORT 2 RF+DC DC THROUGH

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Typical Performance Data Frequency (MHz) Total Loss1 (dB) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR VSWR S-1 S-2 1. Total Loss = Insertion Loss + 3dB splitter theoretical loss. ZACS622-100W+Performance Charts 3.0 3.2 3.4 3.6 3.8 650 1760 2870 3980 5090 6200 TOTAL LOSS (dB) FREQUENCY (MHz) ZACS622-100W+ TOTAL LOSS S-1 (dB) S-2 (dB) 650 1760 2870 3980 5090 6200 ISOLATION (dB) FREQUENCY (MHz) ZACS622-100W+ ISOLATION 1.0 1.2 1.4 1.6 1.8 650 1760 2870 3980 5090 6200 VSWR FREQUENCY (MHz) ZACS622-100W+ VSWR #S-VSWR #1-VSWR #2-VSWR