Z300-CXX VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

www.vishay.com Vishay Draloric Revision: 14-Mar-2019 1 Document Number: 21027 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 High Surge Axial Cemented Leaded Wirewound Resistors DESIGN SUPPORT TOOLS AVAILABLE The Z300-Cxx series, is the perfect choice for high voltage surge applications. This product series is tested and proven to meet the 1.2 / 50 μs pulse up to 12 kV defined in IEC 61000-4-5. Typical applications include but are not limited to energy meters, power supplies, etc.

FEATURES

  • High voltage surge (up to 12 kV) withstanding capability
  • Non flammable silicon cement coating
  • High grade ceramic core
  • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

  • Energy meter
  • A p p l i a n c e s
  • Ballast Notes (1) Resistance value to be selected for ± 10 % tolerance from E12 and for ± 5 % from E24, 1 % tolerance available on request (2) Lower TCR products are available on request 33DD3 D 3D Models STANDARD ELECTRICAL SPECIFICATIONS TYPE POWER RATING P40 POWER RATING P70 RESISTANCE RANGE RESISTANCE TOLERANCE (1) TEMPERATURE COEFFICIENT (2) Z301-Cxx 1 W 0.9 W 430  to 2 k ± 5 %, ± 10 % ± 200 ppm/K ZDA0411-Cxx 2 W 1.8 W 180  to 4.3 k Z302-Cxx 3 W 2.7 W 62  to 3.3 k Z303-Cxx 4 W 3.5 W 27  to 3.9 k Z304-Cxx 5 W 4.4 W 15  to 5.6 k Z305-Cxx 6 W 5.3 W 4.7  to 10 k

www.vishay.com Vishay Draloric Revision: 14-Mar-2019 2 Document Number: 21027 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Example: for a Z304-C10, 5 W resistor to withstan d 10 kV surge, minimum ohmic value should be 100 . So the part number will be Z34081831000J6DC10 Note (1) As surge handling capacity depend s upon resistor model and ohmic value, please check feasibility of resistor model, ohmic value and desired surge handling voltage with factory (ww1resistors@vishay.com) PART NUMBER AND PRODUCT DESCRIPTION Part Number: Z34081834700J6DC10 TYPE TCR/MATERIAL RESISTANCE TOLERANCE CODE PACKAGING CODE SPECIAL (1) Z310309 = Z301-C ZDA0411 = ZDA0411-C Z320414 = Z302-C Z330617 = Z303-C Z340818 = Z304-C Z350922 = Z305-C 1 = ± 100 ppm/K 3 = ± 200 ppm/K 4 = SWI (special winding) 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 J = ± 5.0 % K = ± 10.0 % (see Packaging table) C04 = 4 kV surge C06 = 6 kV surge C08 = 8 kV surge C10 = 10 kV surge C12 = 12 kV surge Product Description: Z304-C 3 470R 5 % AB G63 CD1278 Z304-C 3 470R 5 % AB G63 CD1278 TYPE TCR/MATERIAL RESISTANCE TOLERANCE CODE PACKAGING DESCRIPTION CDxxxx = speciality Z301-C ZDA0411-C Z302-C Z303-C Z304-C Z305-C 15R 5K6 5 % 10 % A1 G53 AC G53 AC G73 AC G83 AB G63 AB G83 MINIMUM RESISTANCE VALUE FOR HANDLING SURGE VOLTAGE AS PER IEC 61000-4-5 (1.2 / 50 μs PULSE) POWER TYPE 4 kV SURGE 6 kV SURGE 8 kV SURGE 10 kV SURGE 12 kV SURGE

1 W Z301-Cxx 430R 1K5 - - -

2 W ZDA0411-Cxx 180R 510R 1K1 2K2 3K3

3 W Z302-Cxx 62R 330R 680R 1K8 2K2

4 W Z303-Cxx 27R 91R 220R 470R 820R

5 W Z304-Cxx 15R 43R 82R 100R 330R

6 W Z305-Cxx 4.7R 18R 27R 68R 130R PACKAGING TYPE CODE DESCRIPTION QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS Z301-Cxx 21 A1 G53 1000 Taped acc. to IEC 60286-1 fan-folded in a box 53 mm 5 mm 84 mm x 73 mm x 326 mm ZDA0411-Cxx 21 A1 G53 1000 84 mm x 73 mm x 326 mm Z302-Cxx 2C AC G53 500 53 mm 5 mm 82 mm x 29 mm x 324 mm 4C AC G73 500 73 mm 110 mm x 76 mm x 334 mm 6C AC G83 500 83 mm 110 mm x 87 mm x 324 mm Z303-Cxx 2C AC G53 500 53 mm 5 mm 82 mm x 49 mm x 324 mm 6C AC G83 500 83 mm 10 mm 110 mm x 87 mm x 324 mm Z304-Cxx 6D AB G63 250 63 mm 10 mm 84 mm x 73 mm x 326 mm 6E AB G83 250 83 mm 84 mm x 73 mm x 326 mm Z305-Cxx 6B AB G83 250 83 mm 10 mm 110 mm x 87 mm x 324 mm 0818 470 334 J6D 00Z 1C

www.vishay.com Vishay Draloric Revision: 14-Mar-2019 3 Document Number: 21027 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DESCRIPTION

Wirewound resistors are best su ited for use in high power, high current applications. The silicon cement lacquer coating enables Z300-Cxx to withstand challenging high voltage surge conditions. Suitable ohmic value with de sired surge voltage handling can be selected using table “Minimum Resistance Value for Handling Surge Voltage as per IEC 61000-4-5 (1.2 / 50 μs Pulse)” on page 2. The ceramic meets the highest requirements against mechanical resistance, thermal shocks, dielectric strength, and insulation resistance at high temperatures. With different diameters and turn spacing's, a large ohmic value range can be covered. The coating is resistant to cleaning solvents specified in IEC 60115-1 (1). The resistors are marked with resistance and tolerance. Product quality is verified by testing procedures, performed on all individual resistors. Re sistance is measured on the lead wires at a distance of 6 mm from the resistor body. If a greater length of lead wire is used in the application, the user may need to consider the additional wire resistance, particularly with low resistance products. MATERIALS Vishay acknowledges the following systems for the regulation of hazardous substances:

  • IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (2)
  • The Global Automotive Declarable Substance List (GADSL) (3)
  • The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (4) for its supply chain The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see www.vishay.com/how/leadfree. Hence the products fully comply with the following directives:
  • 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II)
  • 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU
  • 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at www.vishay.com/doc?49037 ASSEMBLY The resistors are axial leaded for soldering. The terminals of the resistors are completely lead (Pb)-free, the special tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. Special lead forms may be av ailable on request, please inquire at ww1resistors@vishay.com These components are high dissipation power resistors, customers are advised to use a high melting point solder.

APPLICATION INFORMATION

The power dissipation of the resistor generates a temperature rise with respect to the ambient. The permissible dissipation is de rated for tempe ratures above 40 °C, as shown in the derating diagram, in order to avoid overheating of the resistor. The heat dissipated from the resistor may affect adjace nt components, hence proper clearance will be required in order to avoid overheating. The resistive wire is hermetically encapsulated. All materials used are non-flammable and inorganic. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.

RELATED PRODUCTS

In similar continuous power applications and challenging environmental conditions, see the datasheets:

  • AC Series - Cemented Wirewound Resistors www.vishay.com/doc?28730
  • Z300-C00 - Commercial Ax ial Cemented Wirewound Resistors www.vishay.com/doc?21047 For precision applications, there is the cement coated PAC series, see the datasheet:
  • PAC Series - Cemented Wirewound Precision Resistors www.vishay.com/doc?28731 Notes (1) Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability (2) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474 (3) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org (4) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table

www.vishay.com Vishay Draloric Revision: 14-Mar-2019 4 Document Number: 21027 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FUNCTIONAL PERFORMANCE HIGH VOLTAGE SURGE The specially designed Z300-Cxx high surge wirewound resistors ar e tested for surge handling ca pability by applying surge voltage as per the 1.2 / 50 μs exponential open circuit voltage waveform according to IEC 61000-4-5 standard as shown below: Front time: T 1 = 1.67 x T = 1.2 μs ± 30 % Time to half-value: T 2 = 50 μs ± 20 % Waveform of open-circuit voltage (1.2 / 50 μs) at the output of pulse generator Derating 100 120 AMBIENT TEMPERATURE IN °C RATED POWER IN % 50 150 250 350- 50 - 55 40 300 200 100 POWER IN W Temperature RiseTEMPERATURE RISE IN K Z301-Cxx ZDA0411-Cxx Temperature Rise 300 200 100 0 1 2 3 4 5 POWER IN W Z303-Cxx TEMPERATURE RISE IN K Z302-Cxx Temperature Rise 300 200 100 0 2 4 POWER IN W Z305-Cxx TEMPERATURE RISE IN K Z304-Cxx 135 150 250 1.0 0.5 0.3 0.1 0.0 A B 0.9 TO1 t30 % max.{ U (% pulse voltage)

www.vishay.com Vishay Draloric Revision: 14-Mar-2019 5 Document Number: 21027 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TESTS PROCEDURES AND REQUIREMENTS All tests are carried out in accordance with the following specifications:

  • IEC 60115-1, generic specification (includes tests) The test and requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The tests are carried out with reference to IEC 60115-1, in accordance with IEC 60068-2-xx test method and under standard atmospheri c conditions in accordance with IEC 60068-1, 5.3. A climatic category 40 / 200 / 56 is applied, defined by the lower category temperature (LCT = -40 °C), the upper category temperature (UCT = 200 °C), and the duration of exposure in the damp heat, steady state test (56 days). Unless otherwise specified the following values apply:
  • Temperature: 15 °C to 35 °C
  • Relative humidity: 45 % to 75 %
  • Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). For performing some of the tests, the components are mounted on a test board in accordance with IEC 60115-1, 4.31. In test procedures and requirem ents table, only the tests and requirements are listed wi th reference to the relevant clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (RMAX.) 4.13 - Short time overload Room temperature; 10x rated power P40; 5 s ± (2 % R + 0.05 ) 4.16 21 (Ua1) 21 (Ub) 21 (Uc) Robustness of terminations Tensile, bending and torsion No damage 4.18 20 (Tb) Resistance to soldering heat Unmounted components

4.23 Climatic sequence:

± (3 % R + 0.1 ) 4.23.2 2 (Ba) dry heat 16 h; 200 C 4.23.3 30 (Db) Damp heat (accelerated) st cycle 24 h; 55 °C; 90 % to 100 % RH 4.23.4 1 (Aa) cold 2 h; -55 °C 4.23.5 13 (M) low air pressure 2 h; 8.5 kPa; 15 °C to 35 °C 4.23.6 30 (Db) damp heat remaining cyclic 5 days; 55 °C; 95 % to 100 % RH; 5 cycles 4.24 78 (Cab) Damp heat, (steady state) 4.25.2 - Endurance (at room temperature) 1000 h; loaded with 116 % of P 70; 1.5 h ON and 0.5 h OFF ± (3 % R + 0.1 ) 4.25.3 - Endurance (at 200 °C) 1000 h; loaded with 30 % of P70; 1.5 h ON and 0.5 h OFF ± (3 % R + 0.1 ) -- Surge test as per IEC 61000-4-5 1.2 / 50 μs surge test (impedance of surge tester is 2 ); 10 pulses at 30 s interval ± (5 % R + 0.1 )

www.vishay.com Vishay Draloric Revision: 14-Mar-2019 6 Document Number: 21027 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS ZDA0411-C RADIAL Z302-C RADIAL Z304-C RADIAL TYPE DIMENSIONS in millimeters (inches) LMAX. DMAX. dMAX. BX MAX. MASS (g) 2 (0.079) 0.6 0.7 0.8 1.1 2.0 P F W DIMENSIONS in millimeters Pitch of components P 12.7 ± 1.0 Lead to lead distance F 4.8 + 0.7 / - 0 Tape width W 18 ± 0.5 Component height H 1 30.0 ± 3 Min. lead wire (tape portion) shortest lead L 1 4.3 W P F DIMENSIONS in millimeters Pitch of components P 12.7 ± 1.0 Lead to lead distance F 5.00 ± 0.5 Tape width W 18 ± 0.5 Maximum component height H 1 34 Min. lead wire (tape portion) shortest lead L 1 2.5 W P F DIMENSIONS in millimeters Pitch of components P 25.4 ± 1.0 Lead to lead distance F 7.50 ± 0.5 Tape width W 18 ± 0.5 Component height H 1 37 ± 2 Min. lead wire (tape portion) shortest lead L 1 4.3

www.vishay.com Vishay Revision: 09-Jul-2021 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED