DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Z ,J zero ohm jumpers
features
- Type Z are conformal coated
- Type J are molded
- Suitable for automatic machine insertion
- Size compatible with 1/8, 1/4 and 1/2 watt resistors
- Marking: Type Z are tan color, single black band identifier Type J are black, no marking
- Products with lead-free terminations meet EU RoHS and China RoHS requirements For further information on packaging, please refer to Appendix C.
ordering information
New Part # C: SnCu C Termination Material T26, T52 T52 Taping and Forming A: Ammo R: Reel A Packaging dimensions and construction Resistive Film d D End Cap Lead Wire L l C Insulation Coating Marking Type Z d D Solder Plated Copper Wire L l Molded Resin Type J L (ref.) Z16 .126±.008 (3.2±0.2) .134 (3.4) .018 (0.45) .024 (0.6) 1.18±.118 (30.0±3.0) .787 min. (20.0 min.) .091±.012 (2.3±0.3) .087±.004 (2.2±0.1) .067±.008 (1.7±0.2) .280 (7.1) .020 (0.5)–– .024 (0.6)–– .240±.02 (6.1±0.5) .228 (5.8) .256±.02 (6.5±0.5) Z25 Z25Y J1/6Z J1/4Z Type C (max.) D d (nom.) l Dimensions inches(mm) .067+.008 -.004 (1.7+0.2)-0.1 .091+0 -.012 (2.3+0 )-0.3 .134+.004 -.008 (3.4+0.1)-0.2 PMS 300 neg. Black neg. EU 105KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.11/17/08 resistors
1733 Reader's Spreads pg1-203:document 1/27/09 4:08 PM Page 103
106 KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.11/17/08 resistors Z ,J zero ohm jumpers Rated Ambient Temperature ResistancePart Designation Maximum Amperage applications and ratings Minimum Dielectric Withstanding Voltage Z16 Z25 Z25Y J1/6Z J1/4Z 1.5A 2.5A 15A 10A 300V 500V 500V +70°C 20mΩ or less 20mΩ or less 10mΩ Max. Operating Temperature Range -55°C to +155°C Derating Curve environmental applicationsAmps -80 -40 0 408 01 60 Ambient Temperature (°C) -55 120 155 Z16 Z25 125 J1/6Z J1/4Z Z25Y Performance Characteristics Parameter Resistance Rapid Change of Temperature Less than 20mΩ Measuring points are 10mm ± 1mm from the end cap Requirement Test Method Terminal Strength (Direct Load) Z16: 5N, 30 seconds, Z25: 10N, 30 seconds (Twist Test) 360°, 5 times (Bending Test) 5N, 90°, 2 times (Z16: 2.5N) No mechanical damages 40°C ±2°C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Endurance @ 70°C 70°C ±2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Solvent Resistance Isopropyl alcohol with ultrasonic cleansing for 2 minutes Power: 0.3W/cm 2, f: 28kHz, Temperature: 35°C ± 5°C No visible damages to protective coating and marking Terminal except 3mm shall be immersed in the solder, 350°C ± 5°C, 3.5 seconds ± 0.5 second Resistance to Solder Heat Solderability 90% coverage minimum 235°C ± 5°C, 5 seconds ± 0.5 second -55°C (30 minutes)/+85°C (30 minutes), 5 cycles Less than 20mΩMoisture Resistance -55°C to +125°C