Z00607MA-ND

Z00607MA NXP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

1.1 General description

1.2 Features

1.3 Applications

1.4 Quick reference data

Table 1. Pinning

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Table 2. Ordering information Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 26 February 2008 3 of 12 NXP Semiconductors Z00607MA Triac logic level α = conduction angle Fig 1. Total power dissipation as a function of RMS on-state current; maximum values f = 50 Hz Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values 003aac209 0.0 0.4 0.8 1.2 0 0.2 0.4 0.6 0.8 1 IT(RMS) (A) Ptot (W) α = 180° 120° 90° 60° 30° conduction angle (degrees) form factor a 120 180 2.8 2.2 1.9 1.57 α 003aac207 1 10 10 2 103 number of cycles ITSM (A) ITSM t IT Tj(init) = 25 °C max 1/f

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 26 February 2008 4 of 12 NXP Semiconductors Z00607MA Triac logic level tp ≤ 20 ms (1) dIT/dt limit (2) T2− G+ quadrant limit Fig 3. Non-repetitive peak on-state current as a function of pulse width; maximum values f = 50 Hz Tlead = 55°C Fig 4. RMS on-state current as a function of surge duration; maximum values Fig 5. RMS on-state current as a function of lead temperature; maximum values 003aac208 102 103 10-5 10-4 10-3 10-2 10-1 tp (s) ITSM (A) ITSM t IT Tj(init) = 25 °C max tp (1) (2) 003aaa617 -2 10-1 1 10 surge duration (s) IT(RMS) (A) 003aaa616 0.2 0.4 0.6 0.8 -50 0 50 100 150 T lead (°C) IT(RMS) (A)

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Table 4. Thermal characteristics

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Table 5. Static characteristics Tj=2 5°C unless otherwise specified.

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Table 6. Dynamic characteristics

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 26 February 2008 8 of 12 NXP Semiconductors Z00607MA Triac logic level Vo = 1.171 V R s = 0.5125Ω (1) Tj = 125°C; typical values (2) Tj = 125°C; maximum values (3) Tj = 25°C; maximum values Fig 9. On-state current as a function of on-state voltage Fig 10. Normalized latching current as a function of junction temperature Fig 11. Normalized holding current as a function of junction temperature 003aab486 0.4 0.8 1.2 1.6 0 0.4 0.8 1.2 1.6 2 V T (V) IT (A) (1) (2) (3) Tj (°C) −60 140 90−10 40 003aaa031 IL IL(25°C) Tj (°C) −60 140 90−10 40 003aaa032 1.0 0.5 1.5 2.0 IH IH(25°C)

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 26 February 2008 9 of 12 NXP Semiconductors Z00607MA Triac logic level 8. Package outline Fig 12. Package outline SOT54 (TO-92) UNIT A REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 5.2 5.0 b 0.48 0.40 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 L 14.5 12.7 e 2.54 1.27 L1(1) max. 2.5 0.66 0.55 DIMENSIONS (mm are the original dimensions) Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. SOT54 TO-92 SC-43A 04-06-28 04-11-16 A L 0 2.5 5 mm scale b c D b1 L1 d E Plastic single-ended leaded (through hole) package; 3 leads SOT54 e

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Table 7. Revision history

Z00607MA_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 26 February 2008 11 of 12 NXP Semiconductors Z00607MA Triac logic level 10. Legal information

10.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

10.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

10.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data —The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.

10.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

NXP Semiconductors Z00607MA Triac logic level © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 26 February 2008 Document identifier: Z00607MA_1 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 12. Contents